ASROCK G43TWINS-FULLHD User Manual page 29

System Panel Header
(9-pin PANEL1)
(see p.12 No. 10)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.12 No. 18)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.12 No. 9)
CPU Fan Connector
FAN_SPEED_CONTROL
(4-pin CPU_FAN1)
(see p.12 No. 33)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
ATX Power Connector
(24-pin ATXPWR1)
(see p.12, No. 6)
Though this motherboard provides 24-pin ATX power connector,
it can still work if you adopt a traditional 20-pin ATX power supply.
To use the 20-pin ATX power supply, please plug your
power supply along with Pin 1 and Pin 13.
ATX 12V Power Connector
(4-pin ATX12V1)
(see p.12 No. 1)
This header accommodates
PLED+
PLED-
PWRBTN#
several system front panel
GND
functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
Please connect the chassis
1
speaker to this header.
SPEAKER
DUMMY
DUMMY
+5V
Please connect a chassis fan
cable to this connector and
GND
+12V
CHA_FAN_SPEED
match the black wire to the
ground pin.
Please connect a CPU fan cable
4
to this connector and match
CPU_FAN_SPEED
3
+12V
2
the black wire to the ground pin.
GND
1
Pin 1-3 Connected
3-Pin Fan Installation
Please connect an ATX power
12 24
supply to this connector.
1 13
20-Pin ATX Power Supply Installation
Please connect an ATX 12V
power supply to this connector.
2 9 2 9 2 9
2 9 2 9
12 24
1 13