Storage Configuration - ASROCK G41M-VS2 User Manual

ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Disabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows
3.4.4

3.4.4 Storage Configuration

3.4.4 Storage Configuration Storage Configuration Storage Configuration
3.4.4 3.4.4 Storage Configuration
BIOS SETUP UTILITY
Advanced
Storage Configuration
ATA/IDE Configuration
SATAII_1
SATAII_2
IDE1 Master
IDE1 Slave
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
ATA/IDE Configuration
Please select [Compatible] when you install legacy OS (Windows
®
native OS (Windows
[Enhanced].
When [Compatible] is selected
Combined Option
It allows you to select between [SATA 1, SATA 2], [SATA 1, IDE 1], and
[IDE 1, SATA 2]. If it is set to [SATA 1, IDE 1], then SATAII_2 will not work.
Likewise, if it is set to [IDE 1, SATA 2], then SATAII_1 will not work.
Because Intel
under legacy OS (Windows NT), you have to choose [SATA 1, SATA2],
[SATA 1, IDE 1], or [IDE 1, SATA 2] when the installed device is used
with legacy OS.
[SATA 1, SATA 2]
Master SATAII 1, SATAII 2
IDE Device Configuration
You may set the IDE configuration for the device that you specify. We will
use the "Primary IDE Master" as the example in the following instruction.
® Vista TM certification.
Set [Compatible]
when Legacy OS
(MS-DOS, Win NT)
[Enhanced]
device is used.
Set [Enhanced]
[Hard Disk]
when Native OS
[Not Detected]
(Win2000 / XP)
[Not Detected]
is used.
[Not Detected]
Select Screen Select Screen
Select Item Select Item
+- +- Change Option Change Option
F1 F1 General Help General Help
F9 F9 Load Defaults Load Defaults
F10 F10 Save and Exit Save and Exit
ESC ESC Exit Exit
TM
XP / Vista ) is installed, please select
® ICH7 south bridge only supports two IDE devices
[SATA 1, IDE 1]
SATAII 1
®
NT). If
[IDE 1, SATA 2]
SATAII 2
4 1 4 1 4 1
4 1 4 1