ASROCK G41M-GE3 User Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. G41M-GE3
  6. User manual
ASROCK G41M-GE3 User Manual

ASROCK G41M-GE3 User Manual

Hide thumbs Also See for G41M-GE3:
Table of Contents

Advertisement

Quick Links

Download this manual
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
Copyright Notice:
No part of this installation guide may be reproduced, transcribed, transmitted, or trans-
lated in any language, in any form or by any means, except duplication of documen-
tation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this guide may or may not be registered
trademarks or copyrights of their respective companies, and are used only for identifica-
tion or explanation and to the owners' benefit, without intent to infringe.
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Disclaimer:
Specifications and information contained in this guide are furnished for informational
use only and subject to change without notice, and should not be constructed as a
commitment by ASRock. ASRock assumes no responsibility for any errors or omissions
that may appear in this guide.
With respect to the contents of this guide, ASRock does not provide warranty of any kind,
either expressed or implied, including but not limited to the implied warranties or
conditions of merchantability or fitness for a particular purpose. In no event shall
ASRock, its directors, officers, employees, or agents be liable for any indirect, special,
incidental, or consequential damages (including damages for loss of profits, loss of
business, loss of data, interruption of business and the like), even if ASRock has been
advised of the possibility of such damages arising from any defect or error in the guide
or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic
substance controlled in Perchlorate Best Management Practices (BMP) regulations
passed by the California Legislature. When you discard the Lithium battery in
California, USA, please follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see
www.dtsc.ca.gov/hazardouswaste/perchlorate"
ASRock Website: http://www.asrock.com
Copyright©2010 ASRock INC. All rights reserved.
ASRock G41M-GE3 Motherboard
Published April 2010
1 1 1 1 1

Advertisement

Table of Contents
loading

Related Manuals for ASROCK G41M-GE3

Summary of Contents for ASROCK G41M-GE3

  • Page 1 ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide. With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

  • Page 2: Motherboard Layout

    Motherboard Layout Motherboard Layout Motherboard Layout Motherboard Layout Motherboard Layout PS2_USB_PWR1 Jumper Chassis Speaker Header (SPEAKER 1, White) ATX 12V Connector (ATX12V1) Chassis Intrusion Header (CI1) 775-Pin CPU Socket BIOS SPI Chip CPU Fan Connector (CPU_FAN1) USB 2.0 Header (USB4_5, Blue) 2 x 240-pin DDR3 DIMM Slots USB 2.0 Header (USB6_7, Blue)

  • Page 3: Speed Led

    LAN Port If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use. TABLE for Audio Output Connection Audio Output Channels Front Speaker Rear Speaker...

  • Page 4: Package Contents

    This Quick Installation Guide contains introduction of the motherboard and step-by-step installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD. Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice.

  • Page 5: Specifications

    Specifications Specifications Specifications Specifications Specifications Platform - Micro ATX Form Factor: 9.6-in x 8.6-in, 24.4 cm x 21.8 cm ® - LGA 775 for Intel Core 2 Extreme / Core 2 Quad / Core 2 Duo / Pentium ® Dual Core / Celeron ®...
  • Page 6 - 4 x Ready-to-Use USB 2.0 Ports - 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED) - HD Audio Jack: Side Speaker/Rear Speaker/Central/Bass/ Line in/Front Speaker/Microphone (see CAUTION 7) Connector - 4 x SATAII 3.0 Gb/s connectors (No Support for RAID and “Hot Plug”...
  • Page 7 Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
  • Page 8 USB flash drive or hard drive must use FAT32/16/12 file system. 13. The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a conve- nient way for the user to record the OC settings and share with others.
  • Page 9 16. EuP, stands for Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required.

  • Page 10: Pre-Installation Precautions

    Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found.
  • Page 11 775-LAND CPU For proper inserting, please ensure to match the two orientation key notches of the CPU with the two alignment keys of the socket. Step 2-3. Carefully place the CPU into the socket by using a purely vertical motion.

  • Page 12: Installation Of Cpu Fan And Heatsink

    1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS.

  • Page 13: Installation Of Memory Modules (Dimm)

    (the same brand, speed, size and chip- type) DDR3 DIMM pair in the slots of the same color. In other words, you have to install identical DDR3 DIMM pair in Dual Channel A (DDR3_A1 and DDR3_B1;...

  • Page 14: Installing A Dimm

    Unlock a DIMM slot by pressing the retaining clips outward. Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot. The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

  • Page 15: Expansion Slots (Pci And Pci Express Slots)

    2.4 Expansion Slots (PCI and PCI Express Slots) 2.4 Expansion Slots (PCI and PCI Express Slots) There are 2 PCI slots and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. PCIE slots: PCIE1 (PCIE x1 slot) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.

  • Page 16: Jumpers Setup

    2-pin jumper (see p.2 No. 11) Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply.

  • Page 17: Onboard Headers And Connectors

    FDD connector (33-pin FLOPPY1) (see p.2 No. 25) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No. 9)
  • Page 18 USB 2.0 Headers Besides four default USB 2.0 ports on the I/O panel, there are (9-pin USB6_7) two USB 2.0 headers on this (see p.2 No. 22) motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB4_5) (see p.2 No.
  • Page 19 HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system. 2. If you use AC’97 audio panel, please install it to the front panel audio header as below: A.
  • Page 20 Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

  • Page 21: Installation

    STEP 2: Connect the SATA power cable to the SATA / SATAII hard disk. STEP 3: Connect one end of the SATA data cable to the motherboard’s SATAII connector. STEP 4: Connect the other end of the SATA data cable to the SATA / SATAII hard disk. 2 . 8 2 .

  • Page 22: Bios Information

    ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double- click on the file “ASSETUP.EXE” from the BIN folder in the Support CD to display the menus.
  • Page 23 Wir danken Ihnen für den Kauf des ASRock G41M-GE3 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.

  • Page 24: Spezifikationen

    Spezifikationen Spezifikationen Spezifikationen Spezifikationen Spezifikationen Plattform - Micro ATX-Formfaktor: 24.4 cm x 21.8 cm; 9.6 Zoll x 8.6 Zoll ® - LGA 775 für Intel Core 2 Extreme / Core 2 Quad / Core 2 Duo / Pentium ® Dual Core / Celeron ®...
  • Page 25 - 1 x VGA/D-Sub port - 1 x VGA/DVI-D port - 4 x Standard-USB 2.0-Anschlüsse - 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED) - HD Audiobuchse: Lautsprecher seitlich / Lautsprecher hinten / Mitte/Bass / Audioeingang/ Lautsprecher vorne / Mikrofon (siehe VORSICHT 7) Anschlüsse...
  • Page 26 Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen.
  • Page 27 Durch Betriebssystem-Einschränkungen kann die tatsächliche ® Speichergröße weniger als 4 GB betragen, da unter Windows 7 / Vista XP etwas Speicher zur Nutzung durch das System reserviert wird. Unter ® Windows OS mit 64-Bit-CPU besteht diese Einschränkung nicht. Die Maximalspeichergröße ist von den Chipshändler definiert und umgetauscht.
  • Page 28 USB-Flash-Laufwerk oder die Festplatte das Dateisystem FAT32/16/12 benutzen muss. 13. Allein der Name – OC DNA* – beschreibt es wörtlich, was die Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv entwickeltes Dienstprogramm, das Nutzern eine bequeme Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie Anderen mitzuteilen.

  • Page 29: Einstellung Der Jumper

    +5VSB (Standby) zu setzen (siehe S.2 - No. 1) und die PS/2 oder USB- Weckfunktionen zu aktivieren. Hinweis: Um +5VSB nutzen zu können, muss das Netzteil auf dieser Leitung 2A oder mehr leisten können. CMOS löschen (CLRCMOS1, 2-Pin jumper) 2-Pin jumper (siehe S.2 - No.
  • Page 30 (33-Pin FLOPPY1) die rotgestreifte Seite auf Stift 1 (siehe S.2 - No. 25) Hinweis: Achten Sie darauf, dass die rotgestreifte Seite des Kabel mit der Stift 1- Seite des Anschlusses verbunden wird. Primärer IDE-Anschluss (Blauer) (39-pin IDE1, siehe S.2 - No. 9)
  • Page 31 USB 2.0-Header Zusätzlich zu den vier üblichen USB 2.0-Ports an den (9-pol. USB6_7) I/O-Anschlüssen befinden sich (siehe S.2 - No. 22) zwei USB 2.0-Anschlussleisten am Motherboard. Pro USB 2.0- Anschlussleiste werden zwei USB 2.0-Ports unterstützt. (9-pol. USB4_5) (siehe S.2 - No. 21) TPM-Stiftleiste Dieser Anschluss unterstützt ein...
  • Page 32 Geräte), wobei jedoch die Bildschirmverdrahtung am Gehäuse HDA unterstützen muss, um richtig zu funktionieren. Beachten Sie bei der Installation im System die Anweisungen in unserem Handbuch und im Gehäusehandbuch. 2. Wenn Sie die AC’97-Audioleiste verwenden, installieren Sie diese wie nachstehend beschrieben an der Front-Audioanschlussleiste: A.
  • Page 33 Obwohl dieses Motherboard einen 24-pol. ATX-Stromanschluss bietet, kann es auch mit einem modifizierten traditionellen 20-pol. ATX-Netzteil verwendet werden. Um ein 20-pol. ATX-Netzteil zu verwenden, stecken Sie den Stecker mit Pin 1 und Pin 13 ein. Installation eines 20-pol. ATX-Netzteils Anschluss für...
  • Page 34 Erscheint der Wilkommensbildschirm nicht, so “doppelklicken” Sie bitte auf das File ASSETUP.EXE im BIN-Verzeichnis der Support-CD, um die Menüs aufzurufen. Das Setup-Programm soll es Ihnen so leicht wie möglich machen. Es ist menügesteuert, d.h. Sie können in den verschiedenen Untermenüs Ihre Auswahl treffen und die Programme werden dann automatisch installiert.

  • Page 35: Contenu Du Paquet

    1.1 Contenu du paquet Carte mère ASRock G41M-GE3 (Facteur de forme Micro ATX: 9.6 pouces x 8.6 pouces, 24.4 cm x 21.8 cm) Guide d’installation rapide ASRock G41M-GE3 CD de soutien ASRock G41M-GE3 Deux câbles de données de série ATA (SATA) (en option)
  • Page 36 - nuanceur de pixels 4.0, DirectX 10 - mémoire partagée max 1759MB (voir ATTENTION 6) - Output de VGA Duel: supporter DVI-D et D-Sub ports par les controleurs de display independents - Prend en charge le DVI avec une résolution maximale jusqu’à...
  • Page 37 - 1 x port VGA/D-Sub - 1 x port VGA/DVI-D - 4 x ports USB 2.0 par défaut - 1 x port LAN RJ-45 avec LED (ACT/LED CLIGNOTANTE et LED VITESSE) - Prise HD Audio: Haut-parleur latéral / Haut-parleur arrière / Central /Basses / Entrée Ligne / Haut-parleur frontal /...
  • Page 38 - FCC, CE, WHQL - Prêt pour EuP (alimentation Prêt pour EuP requise) (voir ATTENTION 16) * Pour de plus amples informations sur les produits, s’il vous plaît visitez notre site web: http://www.asrock.com ATTENTION Il est important que vous réalisiez qu’il y a un certain risque à effectuer l’overclocking, y compris ajuster les réglages du BIOS, appliquer la technologie Untied Overclocking, ou...
  • Page 39 Avant d’installer le disque dur SATAII au connecteur SATAII, veuillez lire le Guide « Installation du disque dur SATAII » à la page 25 du « Manuel de l’utilisateur » qui se trouve sur le CD de support pour régler votre lecteur de disque dur SATAII au mode SATAII.
  • Page 40 Pour améliorer la dissipation de la chaleur, n’oubliez pas de mettre de la pâte thermique entre le CPU le dissipateur lors de l’installation du PC.
  • Page 41 (voir p.2 No. 1) (standby) et permettre aux périphériques PS/2 ou USB de réveiller le système. Note: Pour sélectionner +5VSB, il faut obligatoirement 2 Amp et un courant standby supérieur fourni par l’alimentation. Effacer la CMOS (CLRCMOS1, le cavalier à 2 broches le cavalier à...
  • Page 42 (FLOPPY1 br. 33) (voir p.2 No. 25) le côté avec fil rouge côté Broche1 Note: Assurez-vous que le côté avec fil rouge du câble est bien branché sur le côté Broche1 du connecteur. Connecteur IDE primaire (Bleu) (IDE1 br. 39, voir p.2 No. 9)
  • Page 43 En-tête USB 2.0 A côté des quatre ports USB 2.0 par défaut sur le panneau (USB6_7 br.9) E/S, il y a deux embases USB (voir p.2 No. 22) 2.0 sur cette carte mère. Chaque embase USB 2.0 peut (USB4_5 br.9) prendre en charge 2 ports USB (voir p.2 No.
  • Page 44 1. L’audio à haute définition (HDA) prend en charge la détection de fiche, mais le fil de panneau sur le châssis doit prendre en charge le HDA pour fonctionner correctement. Veuillez suivre les instructions dans notre manuel et le manuel de châssis afin installer votre système.
  • Page 45 (voir p.2 No. 4) ien que cette carte mère offre un support de (Ventilateur silencieux) ventilateur de CPU à 4 broches , le ventilateur de CPU à 3 broches peut bien fonctionner même sans la fonction de commande de vitesse du ventilateur.

  • Page 46: Informations Sur Le Cd De Support

    BIOS après le POST, veuillez redémarrer le système en pressant <Ctl> + <Alt> + <Suppr>, ou en pressant le bouton de reset sur le boîtier du système. Vous pouvez également redémarrer en éteignant le système et en le rallumant.

  • Page 47: Contenuto Della Confezione

    Grazie per aver scelto una scheda madre ASRock G41M-GE3, una scheda madre affidabile prodotta secondo i severi criteri di qualità ASRock. Le prestazioni eccellenti e il design robusto si conformano all’impegno di ASRock nella ricerca della qualità e della resistenza.
  • Page 48 1.2 Specifiche Specifiche Specifiche Specifiche Specifiche Piattaforma - Micro ATX Form Factor: 9.6-in x 8.6-in, 24.4 cm x 21.8 cm Processore - LGA 775 per Intel ® Core 2 Extreme / Core 2 Quad / Core ® ® ® Duo / Pentium...
  • Page 49 - 1 x Porta VGA/D-Sub - 1 x Porta VGA/DVI-D - 4 x porte USB 2.0 già integrate - 1 x porta LAN RJ-45 con LED (LED azione/collegamento e LED velocità) - Connettore HD Audio: cassa laterale / cassa posteriore / cassa...
  • Page 50 * Per ulteriori informazioni, prego visitare il nostro sito internet: http://www.asrock.com AVVISO Si prega di prendere atto che la procedura di overclocking implica dei rischi, come anche la regolazione delle impostazioni del BIOS, l’applicazione della tecnologia Untied Overclocking Technology, oppure l’uso di strumenti di overclocking forniti da terzi. L’overclocking può...
  • Page 51 64-bit / Vista / XP 64 bit / XP SP1; SP2. 10. Si tratta di uno strumento di sicronizzazione ASRock di face uso in grado di implementare il controllo del sistema tramite la funzione di hardware monitor e sincronizzare le Vostre unita‘ hardware per ottenere la migliore ®...
  • Page 52 13. Il nome stesso del software – OC DNA – dice di cosa è capace. OC DNA, una utilità esclusiva sviluppata da ASRock, fornisce un modo comodo per registrare le impostazioni OC e condividerle con gli altri. Aiuta a salvare le registrazioni di overclocking nel sistema operativo e semplifica la complicata procedura di registrazione delle impostazioni di overclocking.
  • Page 53 Nota: CLRCMOS1 consente di pulire i dati nella CMOS. I dati nella CMOS includono informazioni del setup del sistema, come per esempio la password di sistema, la data, l’ora, e i parametri del setup di sistema. Per pulire I parametri di sistema e resettare ai parametri di default, spegnere il computer e scollegare l’alimentatore, poi collegare il jumper sul CLRCMOS1 per 5 secondi.
  • Page 54 (33-pin FLOPPY1) (vedi p.2 Nr. 25) Lato del Pin1 con la striscia rossa Nota: Assicurarsi che il lato del cavo con la striscia rossa sia inserito nel lato Pin1 del connettore. Connettore IDE primario (Blu) (39-pin IDE1, vedi p.2 Nr. 9)
  • Page 55 Collettore USB 2.0 Oltre alle quattro porte USB 2.0 predefinite nel pannello I/O, la (9-pin USB6_7) scheda madre dispone di due (vedi p.2 No. 22) intestazioni USB 2.0. Ciascuna intestazione USB 2.0 supporta due porte USB 2.0. (9-pin USB4_5) (vedi p.2 No. 21)
  • Page 56 1. La caratteristica HDA (High Definition Audio) supporta il rilevamento dei connettori, però il pannello dei cavi sul telaio deve supportare la funzione HDA (High Definition Audio) per far sì che questa operi in modo corretto. Attenersi alle istruzioni del nostro manuale e del manuale del telaio per installare il sistema.
  • Page 57 Sebbene la presente scheda madre disponga di un supporto per ventola CPU a 4 piedini (ventola silenziosa), la ventola CPU a 3 piedini è in grado di funzionare anche senza la funzione di controllo della velocità della ventola. Se si intende collegare la ventola CPU a 3 piedini al connettore della ventola CPU su questa scheda madre, collegarla ai piedini 1-3.
  • Page 58 BIOS; altrimenti, POST continua con i suoi test di routine. Per entrare il BIOS Setup dopo il POST, riavvia il sistema premendo <Ctl> + <Alt> + <Delete>, o premi il tasto di reset sullo chassis del sistema. Per informazioni più dettagliate circa il Setup del BIOS, fare riferimento al Manuale dell’Utente (PDF file) contenuto nel cd di...

  • Page 59: Contenido De La Caja

    ASRock. Esta Guía rápida de instalación contiene una introducción a la placa base y una guía de instalación paso a paso. Puede encontrar una información más detallada sobre la placa base en el manual de usuario incluido en el CD de soporte.
  • Page 60 1 . 2 1 . 2 Especificación Especificación Especificación Especificación Especificación Plataforma - Factor forma Micro ATX: 24,4 cm x 21,8 cm, 9,6” x 8,6” ® Procesador - LGA 775 para Intel Core 2 Extreme / Core 2 Quad / Core ®...
  • Page 61 - 1 x Puerto VGA/D-Sub - 1 x Puerto VGA/DVI-D - 4 x puertos USB 2.0 predeterminados - 1 x Puerto LAN RJ-45 con LED (LED de ACCIÓN/ENLACE y LED de VELOCIDAD) - Conexión de audio: Altavoz lateral / Altavoz trasero / Central/Bajos / Entrada de línea / Altavoz frontal / Micrófono...
  • Page 62 ADVERTENCIA Tenga en cuenta que hay un cierto riesgo implícito en las operaciones de aumento de la velocidad del reloj, incluido el ajuste del BIOS, aplicando la tecnología de aumento de velocidad liberada o utilizando las herramientas de aumento de velocidad de otros fabricantes.
  • Page 63 DDR3 800, DDR3 1066 DDR3 800 DDR3 800 * Módulos de memoria de DDR3 1333 operará en el modo de overclocking. * Al usar un FSB533-CPU en esta placa base, se ejecutara a DDR3 533 si adquiere un modulo de memoria DDR3 800.
  • Page 64 ASRock Instant Flash. Ejecute esta herramienta y guarde el archivo correspondiente al sistema BIOS nuevo en su unidad flash USB, unidad de disco flexible o disco duro para poder actualizar el BIOS con sólo pulsar un par de botones, sin necesidad de preparar un disco flexible adicional ni utilizar complicadas utilidades de programación.
  • Page 65 3 para habilitar +5VSB (vea p.2, N. 1) (standby) para PS/2 o USB wake up events. Atención: Para elegir +5VSB, se necesita corriente mas que 2 Amp proveida por la fuente de electricidad. Limpiar CMOS (CLRCMOS1, jumper de 2 pins) jumper de 2 pins (vea p.2, N.
  • Page 66 (vea p.2, N. 25) la banda roja debe quedar en el mismo lado que el contacto 1 Atención: Asegúrese que la banda roja del cable queda situado en el mismo lado que el contacto 1 de la conexión. IDE conector primario (Azul) (39-pin IDE1, vea p.2, N.
  • Page 67 Conector de detección de intrusión en el chasis Esta placa base admite la función de control de (2-pin CI1) APERTURA DE CARCASA, que (vea p.2, N.
  • Page 68 2. Si utiliza el panel de sonido AC’97, instálelo en la cabecera de sonido del panel frontal de la siguiente manera: A. Conecte Mic_IN (MIC) a MIC2_L.
  • Page 69 Si pretende enchufar el ventilador de procesador de 3 contactos en el conector del ventilador de procesador de esta placa base, conéctelo al contacto 1-3. Contacto 1-3 conectado Instalación del ventilador de 3 contactos...
  • Page 70 Para iniciar la instalación, ponga el CD en el lector de CD y se desplegará el Menú Principal automáticamente si «AUTORUN» está habilitado en su computadora. Si el Menú...
  • Page 71 ASRock. ASRock G41M-GE3 Motherboard...
  • Page 72 ASRock G41M-GE3 Motherboard...
  • Page 73 ASRock G41M-GE3 Motherboard...
  • Page 74 ASRock G41M-GE3 Motherboard...
  • Page 75 ASRock G41M-GE3 Motherboard...
  • Page 76 ASRock G41M-GE3 Motherboard...
  • Page 77 Short Open CMOS ASRock G41M-GE3 Motherboard...
  • Page 78 1 SATAII_2 SATAII_4 SATAII_1 SATAII_3 ASRock G41M-GE3 Motherboard...
  • Page 79 CI1) IR1) ASRock G41M-GE3 Motherboard...
  • Page 80 PANEL1) ASRock G41M-GE3 Motherboard...
  • Page 81 ATX. 12V-ATX ATX 12 COM- ASRock G41M-GE3 Motherboard...
  • Page 82 BIOS Setup Power-On-Self-Test – POST POST BIOS Setup POST Ctrl> + <Alt> + <Delete BIOS Setup ASRock G41M-GE3 Motherboard...
  • Page 83 Gratos por comprar nossa placa–mãe G41M-GE3, um produto confiável feito com ASRock um estrito controle de qualidade consistente. Com um excelente desempenho, essa placa é dotada de um projeto robusto que atende a ASRock de compromisso com a qualidade e durabilidade.
  • Page 84 1.2 Especificações 1.2 Especificações 1.2 Especificações 1.2 Especificações 1.2 Especificações Plataforma - Formato Micro ATX: 9,6 pol. x 8,6 pol., 24,4 cm x 21,8 cm ® - Socket Intel Dual Core Core 2 Extreme / Core 2 Quad / ®...
  • Page 85 - 1 x porta VGA/D-Sub - 1 x porta VGA/DVI-D - 4 x portas USB 2.0 padrão - 1 x porta LAN RJ-45 com LED (LED ACT/LIG e LED VELOCIDADE) - HD Áudio Jack: Altifalante lateral / Altifalante traseiro /...
  • Page 86 AVISO Tenha em atenção que a operação de overclocking envolve alguns riscos, nomeadamente no que diz respeito ao ajuste das definições do BIOS, à aplicação da tecnologia Untied Overclocking ou à utilização de ferramentas de overclocking de terceiros. O overclocking pode afectar a estabilidade do seu sistema ou até...
  • Page 87 Em termos do microfone, esta placa-principal suporta ambos os modos estéreo e mono. Quanto à saída de áudio, esta placa-principal suporta os modos de 2, 4, 6 e 8 canais. Consulte a tabela na página 3 para uma ligação correcta.
  • Page 88 Veuillez noter que le lecteur flash USB ou le disque dur doit utiliser le système de fichiers FAT32/16/12. 13. O próprio nome do software – OC DNA diz-lhe literalmente aquilo de que é capaz. OC DNA, um utilitário exclusivo desenvolvido pela ASRock, proporciona uma forma conveniente para o utilizador gravar as definições OC e partilhar com outros.
  • Page 89 (veja a folha 2, No. 1) para PS/2 ou eventos de wake up na USB. Nota: Para escolher +5VSB, é preciso uma corrente de stand by de 2 A ou mais. Restaurar CMOS (CLRCMOS1, jumper de 2 pinos) jumper de 2 pinos (veja a folha 2, No.
  • Page 90 (FLOPPY 1, 33 pinos) (veja a folha 2, No. 25) o lado com listras vermelhas para o Pino 1 Nota: Certifique-se de que o lado com listras vermelhas no cabo seja conectado ao lado Pino 1 do conector. Conector primário (Azul) (IDE1 de 39 pinos, veja a folha 2, No.
  • Page 91 Cabezal USB 2.0 Além das quatro portas USB 2.0 por defeito no painel de (USB6_7 de 9 pinos) entrada/saída, há dois (veja a folha 2, No. 22) ligações USB 2.0 nesta placa- mãe. Cada ligação USB 2.0 pode suportar dois portas USB 2.0.
  • Page 92 Siga s instruções que aparecem no manual e no manual do chassis para instalar o sistema. 2. Se utilizar o painel de áudio AC’97, instale-o no cabeçalho de áudio do painel frontal, como a figura abaixo mostra: A. Ligue o Mic_IN (MIC) ao MIC2_L.
  • Page 93 (Ventoinha silenciosa), uma ventoinha de 3 pinos para CPU poderá funcionar mesmo sem a função de controlo de velocidade da ventoinha. Se pretender ligar uma ventoinha de 3 pinos para CPU ao conector de ventoinha do CPU nesta placa-mãe, por favor, ligue-a aos pinos 1-3.
  • Page 94 Se desejar acessar o Utilitário de Configuração do BIOS depois do POST, reinicie o sistema pressionando <Ctl> + <Alt> + <Del>, ou pressionando o botão de reinício no chassi do sistema. Para as informações detalhadas sobre o Utilitário de Configuração do BIOS, consulte o Manual do Usuário (arquivo PDF) no CD de suporte.
  • Page 95 ASRock G41M-GE3 Motherboard...
  • Page 96 ® ® ® ® ® ® ® ® ASRock G41M-GE3 Motherboard...
  • Page 97 ASRock G41M-GE3 Motherboard...
  • Page 98 ® “ ” ® ® ® ASRock G41M-GE3 Motherboard...
  • Page 99 “ ” “ ” ® ® ASRock G41M-GE3 Motherboard...
  • Page 100 1 0 0 1 0 0 1 0 0 1 0 0 1 0 0 ASRock G41M-GE3 Motherboard...
  • Page 101 “ ” “ ” “ ” “ ” “ ” 1 0 1 1 0 1 1 0 1 1 0 1 1 0 1 ASRock G41M-GE3 Motherboard...
  • Page 102 SATAII_2 SATAII_4 SATAII_1 SATAII_3 1 0 2 1 0 2 1 0 2 1 0 2 1 0 2 ASRock G41M-GE3 Motherboard...
  • Page 103 1 0 3 1 0 3 1 0 3 1 0 3 1 0 3 ASRock G41M-GE3 Motherboard...
  • Page 104 1 0 4 1 0 4 1 0 4 1 0 4 1 0 4 ASRock G41M-GE3 Motherboard...
  • Page 105 1 0 5 1 0 5 1 0 5 1 0 5 1 0 5 ASRock G41M-GE3 Motherboard...
  • Page 106 “ ” “ ” 1 0 6 1 0 6 1 0 6 1 0 6 1 0 6 ASRock G41M-GE3 Motherboard...
  • Page 107 1 0 7 1 0 7 1 0 7 1 0 7 1 0 7 ASRock G41M-GE3 Motherboard...
  • Page 108 ® ® ® ® ® ® ® ® 1 0 8 1 0 8 1 0 8 1 0 8 1 0 8 ASRock G41M-GE3 Motherboard...
  • Page 109 1 0 9 1 0 9 1 0 9 1 0 9 1 0 9 ASRock G41M-GE3 Motherboard...
  • Page 110 ® ® ® “ ” 1 1 0 1 1 0 1 1 0 1 1 0 1 1 0 ASRock G41M-GE3 Motherboard...
  • Page 111 ® ® ® ® ® ® ® 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 ASRock G41M-GE3 Motherboard...
  • Page 112 – 1 1 2 1 1 2 1 1 2 1 1 2 1 1 2 ASRock G41M-GE3 Motherboard...
  • Page 113 1 1 3 1 1 3 1 1 3 1 1 3 1 1 3 ASRock G41M-GE3 Motherboard...
  • Page 114 SATAII_2 SATAII_4 SATAII_1 SATAII_3 1 1 4 1 1 4 1 1 4 1 1 4 1 1 4 ASRock G41M-GE3 Motherboard...
  • Page 115 1 1 5 1 1 5 1 1 5 1 1 5 1 1 5 ASRock G41M-GE3 Motherboard...
  • Page 116 1 1 6 1 1 6 1 1 6 1 1 6 1 1 6 ASRock G41M-GE3 Motherboard...
  • Page 117 1 1 7 1 1 7 1 1 7 1 1 7 1 1 7 ASRock G41M-GE3 Motherboard...
  • Page 118 ® ® 1 1 8 1 1 8 1 1 8 1 1 8 1 1 8 ASRock G41M-GE3 Motherboard...
  • Page 119 1 1 9 1 1 9 1 1 9 1 1 9 1 1 9 ASRock G41M-GE3 Motherboard...
  • Page 120 ® ® ® ® ® ® ® ® 1 2 0 1 2 0 1 2 0 1 2 0 1 2 0 ASRock G41M-GE3 Motherboard...
  • Page 121 1 2 1 1 2 1 1 2 1 1 2 1 1 2 1 ASRock G41M-GE3 Motherboard...
  • Page 122 ® ® ® ® ® 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 ASRock G41M-GE3 Motherboard...
  • Page 123 ® ® ® ® 1 2 3 1 2 3 1 2 3 1 2 3 1 2 3 ASRock G41M-GE3 Motherboard...
  • Page 124 1 2 4 1 2 4 1 2 4 1 2 4 1 2 4 ASRock G41M-GE3 Motherboard...
  • Page 125 SATAII_2 SATAII_4 SATAII_1 SATAII_3 1 2 5 1 2 5 1 2 5 1 2 5 1 2 5 ASRock G41M-GE3 Motherboard...
  • Page 126 1 2 6 1 2 6 1 2 6 1 2 6 1 2 6 ASRock G41M-GE3 Motherboard...
  • Page 127 1 2 7 1 2 7 1 2 7 1 2 7 1 2 7 ASRock G41M-GE3 Motherboard...
  • Page 128 ® ® 1 2 8 1 2 8 1 2 8 1 2 8 1 2 8 ASRock G41M-GE3 Motherboard...
  • Page 129 1 2 9 1 2 9 1 2 9 1 2 9 1 2 9 ASRock G41M-GE3 Motherboard...
  • Page 130 1 3 0 1 3 0 1 3 0 1 3 0 1 3 0 ASRock G41M-GE3 Motherboard...
  • Page 131 ® ® ® ® ® ® ® ® 1 3 1 1 3 1 1 3 1 1 3 1 1 3 1 ASRock G41M-GE3 Motherboard...
  • Page 132 1 3 2 1 3 2 1 3 2 1 3 2 1 3 2 ASRock G41M-GE3 Motherboard...
  • Page 133 ® ® ® ® ® 1 3 3 1 3 3 1 3 3 1 3 3 1 3 3 ASRock G41M-GE3 Motherboard...
  • Page 134 ® ® ® ® 1 3 4 1 3 4 1 3 4 1 3 4 1 3 4 ASRock G41M-GE3 Motherboard...
  • Page 135 1 3 5 1 3 5 1 3 5 1 3 5 1 3 5 ASRock G41M-GE3 Motherboard...
  • Page 136 SATAII_2 SATAII_4 SATAII_1 SATAII_3 1 3 6 1 3 6 1 3 6 1 3 6 1 3 6 ASRock G41M-GE3 Motherboard...
  • Page 137 1 3 7 1 3 7 1 3 7 1 3 7 1 3 7 ASRock G41M-GE3 Motherboard...
  • Page 138 1 3 8 1 3 8 1 3 8 1 3 8 1 3 8 ASRock G41M-GE3 Motherboard...
  • Page 139 ® ® ® 1 3 9 1 3 9 1 3 9 1 3 9 1 3 9 ASRock G41M-GE3 Motherboard...

This manual is also suitable for:

Sg41m-ge3

Table of Contents