ASROCK G41M-VS2 User Manual page 21

For Windows
Click "Audio I/O", select "Connector Settings"
"Disable front panel jack detection", and save the change by
clicking "OK".
For Windows
Click the right-top "Folder" icon
panel jack detection", and save the change by clicking "OK".
G. To activate the front mic.
For Windows
Please select "Front Mic" as default record device.
If you want to hear your voice through front mic, please deselect "Mute"
icon in "Front Mic" of "Playback" portion.
For Windows
Go to the "Front Mic" Tab in the Realtek Control panel.
Click "Set Default Device" to make the Front Mic as the default record
device.
System Panel Header
(9-pin PANEL1)
(see p.10 No. 9)
Chassis Speaker Header
(4-pin SPEAKER 1)
(see p.10 No. 10)
Chassis Fan Connector
(3-pin CHA_FAN1)
(see p.10 No. 14)
CPU Fan Connector
GND
(4-pin CPU_FAN1)
(see p.10 No. 3)
Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin
CPU fan still can work successfully even without the fan speed control function.
If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this
motherboard, please connect it to Pin 1-3.
XP / XP 64-bit OS:
®
Vista / Vista 64-bit OS:
® TM TM
XP / XP 64-bit OS:
®
® Vista TM / Vista TM 64-bit OS:
This header accommodates
PLED+
PLED-
PWRBTN#
several system front panel
GND
functions.
1
DUMMY
RESET#
GND
HDLED-
HDLED+
Please connect the chassis
1
SPEAKER speaker to this header.
DUMMY
DUMMY
+5V
Please connect a chassis fan
cable to this connector and
GND
match the black wire to the
+12V
CHA_FAN_SPEED
ground pin.
Please connect a CPU fan cable
+12V
CPU_FAN_SPEED
to this connector and match
FAN_SPEED_CONTROL
the black wire to the ground pin.
1 2 3 4
Pin 1-3 Connected
3-Pin Fan Installation
, choose
, choose "Disable front
2 1 2 1 2 1
2 1 2 1