Cpu Configuration - ASROCK ALIVENF6G-GLAN User Manual

3.3.1 CPU Configuration

3.3.1 3.3.1 CPU Configuration CPU Configuration CPU Configuration
3.3.1 3.3.1 CPU Configuration
BIOS SETUP UTILITY
Advanced
CPU Configuration
AM2 Boost
Overclock Mode
CPU Frequency (MHz)
PCIE Frequency (MHz)
Boot Failure Guard
CPU/LDT Spread Spectrum
PCIE Spread Spectrum
SATA Spread Spectrum
Cool' n' Quiet
Processor Maximum Multiplier
Processor Maximum Voltage
Multiplier/Voltage Change
Memory Clock
Flexibility Option
CAS Latency
TRAS
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
AM2 Boost
If you set this option to [Enabled], you will enable ASRock AM2 Boost
function, which will improve the memory performance. The default value is
[Disabled]. Please refer to caution 8 on page 8 for details.
Overclock Mode
Use this to select Overclock Mode. The default value is [Auto]. Configura-
tion options: [Auto], [CPU, PCIE, Sync.] and [CPU, PCIE, Async.].
CPU Frequency (MHz)
Use this option to adjust CPU frequency.
PCIE Frequency (MHz)
Use this option to adjust PCIE frequency.
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
CPU/LDT Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled] and [Enabled].
PCIE Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled] and [Enabled].
SATA Spread Spectrum
This feature will be set to [Enabled] as default. Configuration
options: [Disabled] and [Enabled].
If AUTO, multiplier and
[Disabled]
voltage will be left at the
[Auto]
rated frequency/voltage. If
[200]
Manual, multiplier and
[100]
voltage will be set based
[Enabled]
on User Selection in Setup.
[Enabled]
[Enabled]
[Enabled]
[Auto]
Select Screen Select Screen
x11
1.550 V Select Item Select Item
[Auto] +- +- Change Option Change Option
F1 F1 General Help General Help
[Auto]
F9 F9 Load Defaults Load Defaults
[Disabled]
F10 F10 Save and Exit Save and Exit
[Auto]
[Auto] ESC ESC Exit Exit
3 4 3 4 3 4 3 4 3 4