ASROCK ALIVENF6G-GLAN User Manual page 22

ATX Power Connector
(20-pin ATXPWR1)
(see p.10 No. 30)
ATX 12V Power Connector
(4-pin ATX12V1)
(see p.10 No. 2)
Serial port Header
(9-pin COM1)
(see p.10 No.31)
HDMI_SPDIF Header
(3-pin HDMI_SPDIF1)
(see p.10 No. 25)
HDMI_SPDIF Cable
(Optional)
A. black end
+5V
SPDIFOUT blue
GND black
Please connect an ATX power
supply to this connector.
Please note that it is necessary
to connect a power supply with
ATX 12V plug to this connector.
Failing to do so will cause power
up failure.
This COM1 header supports a
RRXD1
DDTR#1
serial port module.
DDSR#1
CCTS#1
1
RRI#1
RRTS#1
GND
TTXD1
DDCD#1
HDMI_SPDIF header, providing
SPDIF audio output to HDMI VGA
1
card, allows the system to
GND
SPDIFOUT
+5V
connect HDMI Digital TV/
projector/LCD devices. Please
connect the HDMI_SPDIF
connector of HDMI VGA card to
this header.
Please connect the black end (A)
C
of HDMI_SPDIF cable to the
B
HDMI_SPDIF header on the
A
motherboard. Then connect the
white end (B or C) of
HDMI_SPDIF cable to the
HDMI_SPDIF connector of HDMI
VGA card.
B. white end (2-pin) C. white end (3-pin)
SPDIFOUT
blue SPDIFOUT
GND black
2 2 2 2 2 2 2 2 2 2
blue
GND black