Epoch Design ABIGAIL 5502 Assembly Instructions

1/2
Congratulations on the purchase of your ABIGAIL 6 drawer dresser. This dresser has been crafted to the
highest standards of quality and safety and will give you many years of enjoyment and practical use.
Since this dresser is a natural bamboo product there will be variations in color and grain, and minor wood
grain checking may occur. This is normal and does not compromise the integrity of your dresser. variation in the
character of this piece is integral to its beauty and distinguishes it from lower quality composite materials.
Assembly is quite simple and requires only a Phillips head screwdriver. The use of a power drill with Phillips
head attachment is helpful but not necessary. Assembly will be most easily accomplished if you take the time to
carefully sort the hardware and familiarize yourself with the function of each piece.
4x 45mm Bolts
Used to attach valance to dresser
3x 30mm wood dowel
Used to attach the Valance
10 20 30
A
4x Outer Legs
If you should require assistance with assembly, part replacement or any other matter, contact the toll-free
Epoch Design Service Center from anywhere in the Continental United States, Monday through Friday, 9 AM – 5 PM
Paci c Standard Time at 1-800-589-7990. You may also email your request or comments to info@epochbydesign.com
and a service representative will respond.
HAVE QUESTIONS OR CONCERNS? CALL US FIRST: 1-800-589-7990
ABIGAIL 6 DRAWER DRESSER
HARDWARE LIST
20x 15mm Bolts
Used to attach legs
20x Spring Washers
Used to attach legs
PARTS
B
1x Center Leg
*includes levler foot
on bottom
COPYRIGHT © 2023 EPOCH DESIGN™ ALL RIGHTS RESERVED
5502
20x Flat Washers
Used to attach legs
1x Allen Wrench
Used to tighten bolts
1x 6 Drawer Dresser
C
1x Valance
PRE INSTALLED
6x Drawer handles
Used to open drawers
12x 40mm Machine Screws
Used to attach drawer handles
Thank you and Enjoy
Oct-2023