Epoch Design Dakota Twin 5103 Instructions

Over full bunk bed

Advertisement

1/4
Congratulations on the purchase of your Dakota Twin Over Full Bunk bed. This bed has been crafted to the
highest standards of quality and safety and will give you many years of enjoyment and practical use. Your bunk
bed can be separated into two individual twin beds if the need arises for alternate sleeping con gurations.
Several basic safety considerations must be adhered to when using this bunk bed.
TO HELP PREVENT serious or fatal injury from entrapment or falls:
• Never allow a child under 6 years on upper bunk
• Always use the recommended size mattresses or mattress supports – standard twin 38" x 74" (96.5 cm x 188 cm)
on upper bed and standard full 54" x 74" (137.2cm x 188cm) on lower bed – to help prevent the likelihood of
entrapment or falls
• Ensure thickness of mattress does not exceed 9" (22.9 cm) for the upper bed
• Surface of mattress must be at least 5" (12.7 cm) below upper edge of safety rails
• Always use safety rails on both sides of upper bunk
• Do not allow horseplay on or under bed(s) and prohibit jumping on the bed(s)
• Prohibit more than one person on upper bed
• If the bunk will be placed next to a wall, the safety rail that runs the full length of the bed should be placed
against the wall to prevent entrapment between the bed and the wall
• Follow the information on the warning labels appearing on the upper bunk end board and on the carton
• Do not remove warning label from bed
• Periodically check and ensure that the safety rails, ladder and other components are in their proper positions,
free from damage, and that all connectors are tight
• Do not use substitute parts
• Contact manufacturer or dealer for replacement parts
• The use of a water or sleep otation mattress is prohibited
• Keep these instructions for future reference
• Use of a night light may provide added safety precaution for a child using the upper bunk
• STRANGULATION HAZARD- Never attach or hang items to any parts of the bunk bed that are not designed
for use with the bed, including but not limited to hooks, belts or jump ropes
On this insert you will find a list of the hardware and bunk bed parts included, as well as detailed
Assembly Instructions. Assembly is quite simple, and requires only a flat head screwdriver and a Phillips head
screwdriver. The use of a power drill with Phillips head attachment is helpful but not necessary. Assembly will
be most easily accomplished if you take the time to carefully sort the hardware and familiarize yourself with
the function of each piece.
If you need assistance with assembly, part replacement, or any other matter, please contact the toll-free Epoch
Design Customer Service Team from Monday through Friday, 9 AM-5PM PST at 1 (800) 589-7990.
You may also email your request or comments to info@epochbydesign.com and a customer service
representative will respond.
HAVE QUESTIONS OR CONCERNS? CALL US FIRST: 1-800-589-7990
Dakota Twin Over Full Bunk bed
5103: DA-TF-BB-WH
Copyright © 2018 Epoch Design™ All rights reserved
31-May-2018
Thank you and Enjoy

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dakota Twin 5103 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Epoch Design Dakota Twin 5103

  • Page 1 Design Customer Service Team from Monday through Friday, 9 AM-5PM PST at 1 (800) 589-7990. You may also email your request or comments to info@epochbydesign.com and a customer service representative will respond. Thank you and Enjoy HAVE QUESTIONS OR CONCERNS? CALL US FIRST: 1-800-589-7990 Copyright © 2018 Epoch Design™ All rights reserved...
  • Page 2 31-May-2018 16x 100mm bolts 8x 40mm bolts 70x 30mm slat screws 6x 15mm Round Screws Used to secure slats Used to secure center Used to connect Used to attach to rails & center support support to brackets and end boards to side rails safety rails to bunk ladder hooks to ladder 16x Barrel nuts...
  • Page 3 31-May-2018 Assemble the twin upper bed by Unroll the slat bundle attaching the short end boards to the (strap side down) onto side upper bed side rails with the pre-drilled rails, distributing them holes for safety rail attachment. evenly from end to end. Secure the slats to the side ledges with 30mm Insert barrel nuts into side rails.
  • Page 4 31-May-2018 Insert a bunk Insert full mattress retaining board between connector pin into the headboard and the wooden block on each of the four the end of the side rail. holes on the bottom end boards. Repeat for footboard. With the assistance of another person place the upper bunk on top of the...

Table of Contents