Advertisement
1/4
E
D
POCH
ESIGN
Congratulations on the purchase of your Peyton Storage Trundle Platform Bed. This bed has been crafted to the highest
standards of quality and safety and will give you many years of enjoyment and practical use.
On this insert you will nd a list of the hardware, platform bed and trundle parts as well as detailed assembly instructions.
Assembly is quite simple and requires only a at head screwdriver and a Phillips head screwdriver. The use of a power drill
with Phillips head attachment is helpful but not necessary. Assembly will be most easily accomplished if you take the time
to carefully sort the hardware and familiarize yourself with the function of each piece.
16x 35mm bolts
Used to connect front
& back panels
mm
10
20
30
2x Side rails
To connect end boards
2x Front Panels
For Trundle
& Storage Drawer
2x Back Panels
For trundle
and storage drawer
2x Trundle Bed
End Panels (Long)
If you need assistance with assembly, part replacement or any other matter, please contact the toll-free Epoch Design
Customer Service Team from Monday through Friday, 9 AM-5 PM PST at 1 (800) 589-7990. You may also email your
request or comments to info@epochbydesign.com and a customer service representative will respond.
Peyton Storage Trundle
, LLC
48x 30mm slat screws
Used to secure
slats to rails
40
1x Middle Trundle
Brace (Long)
2x Left & Right
2x Storage Drawer
End Panels (Short)
HAVE QUESTIONS OR CONCERNS? CALL US FIRST: 1-800-589-7990
Copyright © 2018 Epoch Design™ All rights reserved
5149: PN-FU-XB-ES
HARDWARE LIST
98x 20mm wood screws
Used to attach wheels,
bottom planks &
bottom panels
4x Wooden Dowels
6x Wire Retainers
PARTS
2x Left & Right Trundle Brace
(Long)
Drawer Brace
(Short)
2x Middle Drawer
Brace (Short)
2x Storage Drawer
Dividers (Short)
1x Trundle Divider
(Long)
1x Hex key
4x 15mm wood screws
Used to secure
center support
9x Non Marring Wheels
1x Footboard
1x Headboard
1x Center Support
1x Slat bundle
Rest on side rails and supports
mattress (strap side down)
2x Storage Drawer
Bottom Planks (Left & Right)
1x Trundle Bottom Plank
(center)
2x Trundle Bottom Planks
(Left & Right)
Thank you and Enjoy
01-Oct-2018
Used to tighten
bolt hardware
Advertisement
Table of Contents
Related Manuals for Epoch Design Peyton 5149
Summary of Contents for Epoch Design Peyton 5149
- Page 1 End Panels (Long) (Long) If you need assistance with assembly, part replacement or any other matter, please contact the toll-free Epoch Design Customer Service Team from Monday through Friday, 9 AM-5 PM PST at 1 (800) 589-7990. You may also email your request or comments to info@epochbydesign.com and a customer service representative will respond.
- Page 2 01-Oct-2018 PLATFORM BED Make sure the slat rail is facing the inside of the bed then slide one rail into the grooves of the headboard Repeat this process with the other side rail. Put the center support into the center support brackets. Secure the center support with 15mm wood screws (C).
- Page 3 01-Oct-2018 Carefully ip the trundle over and place it OPTIONAL STORAGE on a soft surface such as a blanket or carpet to prevent scratching of your To use the trundle bed as a storage drawer, simply new drawer. Attach wheels with four remove the mattress, insert the wire retainers on both 20mm wood screws per wheel as sides of the trundle (Diagram G), and slide the drawer...
- Page 4 01-Oct-2018 OPTIONAL COMPARTMENTALIZED STORAGE To compartmentalize the storage drawer, simply add the wire retainers and the wooden dividers as you wish in order to achieve your desired size storage area (See Diagram K). Place your storage drawer and trundle drawer under your platform bed. Congratulations, you are now ready to enjoy your Peyton Storage trundle platform bed.
Need help?
Do you have a question about the Peyton 5149 and is the answer not in the manual?
Questions and answers