Epoch Design 5119 Assembly Instructions Manual

E D
POCH ESIGN
Congratulations on the purchase of your Epoch Design Solid Hardwood RADIA Loft Bed. This bed has
been crafted to the highest standards of quality and safety and will give you many years of enjoin-
ment ad practical use. Your solid hardwood loft bed can be used for sleeping and also as a highly
space efficient work area under the bed.
Since this bed is a natural wood product there will be variations in color ad grain, and minor wood
grain checking may occur. This is normal and does not compromise the integrity and beauty of your
bed. Variation in the character of solid hardwood is integral to the beauty and appeal of hardwood
furniture, and distinguishes it from lower quality materials. Please not that the table top and media
cart top have been covered with a special laminate layer so that you may write on these surfaces
without damaging the wood.
Several Basic safety considerations must be adhered to when using this loft bed.
TO HELP PREVENT serious of fatal injury from entrapment of falls:
• Never allow a child under 6 years on upper bunk.
• Always use the recommended size mattress or mattress support (standard twin 38" x 74" (96.5cm x
188cm)), or both, to help prevent the likelihood of entrapment of falls.
• Ensure thickness of mattress does not exceed 9 inches (22.9cm).
• Mattress must be at least 5 inches (12.7cm) below upper edge of guardrails.
• Always use guardrails on both sides of upper bunk.
• Do not allow horseplay o or under bed(s) and prohibit jumping on the bed.
• Prohibit more than one person on upper bunk.
• Always use the ladder for entering and leaving upper bunk.
• If the bunk will be placed next to a wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and the wall.
• Follow the information on the warnings appearing on the upper bunk and structure and on the
carton. Do not remove warning label from bed.
• Periodically check and ensure that the guardrail, ladder and other components are in their proper
position, free from damage and that all connectors are tight.
• Do not use substitute parts. Contact Mfg. or dealer for replacement parts.
• The use of water or sleep flotation mattress is prohibited.
• Keep these instructions for future reference.
• Use of a night light may provide added safety precaution for a child using the upper bunk.
On this insert you will find a list of the hardware and loft bed parts necessary for assembly, as well as
detailed instructions. Assembly is quite simply and requires only a flat head screwdriver and a Phillips
head screwdriver. The use of a power drill with Phillips head attachment is helpful but not necessary.
Assembly will be most easily accomplished if you take the time to carefully sort the hardware and
familiarize yourself with the function of each piece.
If you should require assistance with assembly, part replacement or any other matter, contact the
toll-free Epoch Design Service Center from anywhere in the Continental United States, Monday
through Friday, 9Am – 5PM Pacific Standard Time at 1-800-589-7990.You may also fax your request or
comments to 425-284-0885 and a service representative will respond.
Thank you and Enjoy
, LLC
Radia Twin Size Loft Bed
Model 5119