Related Manuals for Planika Moon
Summary of Contents for Planika Moon
- Page 1 INSTALLATION AND USER’S MANUAL Moon G30/G31 (Propane-Butane/Propane) Copyright Planika Sp. z o.o. www.planikafires.com IG0373#01 23.04.2024...
-
Page 2: Table Of Contents
T IS OBLIGATORY TO READ AND KEEP THIS INSTRUCTION MANUAL TABLE OF CONTENTS INTRODUCTION ................................. 3 SAFETY INSTRUCTIONS .............................. 3 Safety instruction regarding the use of the gas cartridges................4 INSTALLATION ................................4 3.1. Box contents ..............................4 3.2. Unboxing and installation .......................... -
Page 3: Introduction
A CO2 or a powder fire extinguisher needs to be placed near the device. • During the first ignition The Moon fireplace needs to be burnt on maximum level for a few hours in order for the elements to acquire correct temperature and for the remains of paint, lacquer and lubricant to evaporate. -
Page 4: Safety Instruction Regarding The Use Of The Gas Cartridges
• If The Moon is not in use for a longer period of time (e.g. winter time), we advise you to store it inside. • The Moon fireplace’s parts are made of stain resistant material. -
Page 5: Unboxing And Installation
• Make sure that the device nor its elements weren’t damaged during the transportation (if they were, notify the supplier). • Place Moon on a flat, paved surface outside of the building, preferably on the place of final installation. Leave sufficient space on the side of the appliance where control panel is located (minimum 1 m). -
Page 6: Steel Grate Assemble (Optionally)
• The decorative stones are to be scattered evenly around the reservoir to completely cover the burner of the fireplace. Fig. 4 – Moon top view with ignition elements detail • If all the points were completed according to the instruction the gas cartridge can be now connected 3.3. -
Page 7: Connection Of The Gas Cartridges
3.4.1. Connection of the gas cartridges The Moon is delivered together with an elastic gas linkage which, on one end is connected to the valve of the device and on the other end to the gas regulator ready to be connected to the gas cartridge. -
Page 8: Regulation Of The Flame Size
• Open the valve on gas reducer • Press the knob and while still pressing turn it counter-clockwise from position (1) to position (2) Fig. 10 – Turning the device on • While keeping the knob still pressed start the flame by pressing the ignition button (3). Fig. -
Page 9: Device Shutdown
4.4 Device shutdown • To turn off the device, simultaneously press and turn the knob all the way clockwise. The gas supply will be cut and the flame on burner will be turned off. Fig. 13 – Turning the device off •... -
Page 10: Checking The Flame Appearance
7. WARRANTY Planika Sp. z o.o. grants the Client guarantee of quality for the smooth operation of the goods specified on the sales document. The warranty is determined for a given period from the date of purchase (based on the warranty card together with the receipt of purchase). -
Page 11: Troubleshooting
Unmount the burner and clean/ unblock smoky flame of the burner. producing the gas and air mixture. the apparatus’ holes. 9. MANUFACTURER’S CONTACT DETAILS Company Name: Planika Sp. z o.o. Address: Bydgoskich Przemysłowców 10 Telephone: + 48 52 364 11 60 10. TECHNICAL SPECIFICATION... - Page 12 SELLER Name: Address: Tel/fax: Date of sale: Seller’s seal and signature BUYER Name: Address: Tel/fax: Date of purchase: The gas fireplace should be installed by a qualified Installer in accordance with the applicable national building regulations and in accordance with the guidelines contained in the Installation and User's Manuals. I hereby declare that having read the User's Manual and the Guarantee Conditions.
Need help?
Do you have a question about the Moon and is the answer not in the manual?
Questions and answers