Smart Switches - ASROCK 890FX DELUXE5 User Manual

Rear USB 3.0 Bracket Installation Guide Rear USB 3.0 Bracket Installation Guide Rear USB 3.0 Bracket Installation Guide
Rear USB 3.0 Bracket Installation Guide Rear USB 3.0 Bracket Installation Guide
Step 1
Unscrew the two screws from the Front
USB 3.0 Panel.
Step 3
Screw the two screws into the rear
USB 3.0 bracket.

2.9 Smart Switches

2.9 Smart Switches 2.9 Smart Switches
2.9 Smart Switches 2.9 Smart Switches
This motherboard has three smart switches: power switch, reset switch and
clear CMOS switch, allowing users to quickly turn on/off or reset the system or
clear the CMOS values.
Power Switch
(PWRBTN)
(see p.12 No. 26)
Reset Switch
(RSTBTN)
(see p.12 No. 25)
Clear CMOS Switch
(CLRCBTN)
(see p.13 No. 17)
You are not allowed to use Clear CMOS switch function if you set up the system
password. If you want to clear the CMOS values, please clean your system
password in advance or refer to page 26 "Clear CMOS jumper" description
instead.
Step 2
Put the USB 3.0 cable and the
rear USB 3.0 bracket together.
Step 4
Put the rear USB 3.0 bracket into
the chassis.
Power Switch is a smart switch,
allowing users to quickly turn
on/off the system.
Reset Switch is a smart switch,
allowing users to quickly reset
RESET
the system.
Clear CMOS Switch is a smart
switch, allowing users to quickly
clr
CMOS
clear the CMOS values
3 3 3 3 3 3 3 3 3 3