ASROCK 890FX DELUXE5 User Manual page 28

Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA HDD
power connector
USB 2.0 Headers
(9-pin USB10_11)
(see p.12 No. 13)
(9-pin USB12_13)
(see p.12 No. 12)
USB 3.0 Header
IntA_P2_D+
(19-pin USB3_1_2)
(see p.12 No. 27)
1
ID
Infrared Module Header
(5-pin IR1)
(see p.12 No. 43)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.12 No. 40)
Please connect the black end of
SATA power cable to the power
connector on each drive. Then
connect the white end of SATA
power cable to the power
connect to the
connector of the power supply.
power supply
Besides six default USB 2.0
USB_PWR
P-11
P+11
ports on the I/O panel, there are
GND
DUMMY
two USB 2.0 headers on this
1
motherboard. Each USB 2.0
GND
P+10
header can support two USB
P-10
USB_PWR
2.0 ports.
USB_PWR
P-13
P+13
GND
DUMMY
1
GND
P+12
P-12
USB_PWR
Besides two default USB 3.0
IntA_P2_D-
ports on the I/O panel, there is
GND
IntA_P2_SSTX+
IntA_P2_SSTX-
one USB 3.0 header on this
GND
IntA_P2_SSRX+
motherboard. This USB 3.0
IntA_P2_SSRX-
Vbus
header can support two USB
3.0 ports.
Vbus
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
IntA_P1_D-
IntA_P1_D+
This header supports an
IRTX
+5V
DUMMY optional wireless transmitting
and receiving infrared module.
1
GND
IRRX
This connector allows you
CD1 to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
2 8 2 8 2 8 2 8 2 8