Related Manuals for Arneg ANKARA
Summary of Contents for Arneg ANKARA
- Page 1 INSTALLATION AND OPERATIONS MANUAL ANKARA SINGLE DECK CASE IMPORTANT KEEP IN STORE FOR FUTURE REFERENCE! Arneg USA - Lexington, NC ANKARA...
-
Page 2: Table Of Contents
Identification – Nameplate Receipt and First Inspection First Cleaning Shipping Damage & Unloading Environmental Conditions & Leveling Cases Start-up & Air Flow Maintenance/Do’s & Dont’s Cleaning Information Dismantling Case Useful Advice 12-13 ETL Information Arneg USA - Lexington, NC ANKARA... - Page 3 A T T E N T I O N ! Merchandiser must operate for 24 hours before loading product! Regularly check merchandiser temperatures. Do not break the cold chain. Keep products in freezer before loading into merchandiser. Medium temperature merchandisers are designed for loading ONLY pre-chilled products.
-
Page 4: Introduction - Scope Of The Manual
Introduction - Scope of the Manual / Field of Application This instruction manual covers the single deck Ankara case in the 6ft, 8ft, and 12ft versions. The scope of the information that follows provides information concerning: - Use of the case;... -
Page 5: Receipt And First Inspection
MUST use a GFCI breaker in lieu of NSF CERTIFICATION a GFCI receptacle. These Arneg refrigerated display cases are POWER CORD AND PLUG MAINTENANCE strictly manufactured to meet or exceed the Risk of electric shock! If cord or plug becomes... -
Page 6: Identification - Nameplate
12. Environmental climatic class and reference temperature; 13. Manufacturing date code of the case. Service Requests: In case of technical service request, please communicate the following information for the identification of the cabinet: • product name. • serial number. Arneg USA - Lexington, NC ANKARA... -
Page 7: Shipping Damage & Unloading
NOTE THAT ALL CLAIMS FOR SHORTAGES MUST BE WITHIN 10 DAYS AFTER RECEIPT OF SHIPMENT DO NOT WALK ON TOP OF MERCHANDISERS! Damage to the merchandisers and serious personal injury could occur. Arneg USA - Lexington, NC ANKARA... -
Page 8: Environmental Conditions & Leveling Cases
Excessive ambient conditions may cause the front is also level from end-to-end and front- condensation and therefore sweating of doors. to-rear. Facility operators should monitor doors and floor conditions to ensure safety of persons. Arneg USA - Lexington, NC ANKARA... -
Page 9: Start-Up & Air Flow
DESIGNATED AIR CURTAIN Failure to do so may result in case malfunction and product losing proper temperature, resulting in sub-standard operation and increased chances of food contamination Arneg USA - Lexington, NC ANKARA... -
Page 10: Maintenance/Do's & Dont's
DO NOT USE STEAM OR HIGH WATER PRESSURE disinfectant. Dry components before re- HOSES TO WASH THE INTERIOR. installation. These will destroy the merchandisers sealing • Carefully clean bottom basin, removing all causing leaks & poor performance. foreign objects. Arneg USA - Lexington, NC ANKARA... -
Page 11: Cleaning Information
• Always wipe the surface WITH the grain of AFTERCARE: the metal. • Rinse surface with clean, hot water. • Wipe the surface completely with dry towels, preferably lint-free microfiber. • Always wipe the surface WITH the grain of the metal. Arneg USA - Lexington, NC ANKARA... -
Page 12: Dismantling Case
(not even partially) with stock, labels, accessories or anything else. • Only place stock into the case which is already cooled to the temperature which normally characterizes the cold chain. Verify that the cabinet is always able to maintain that temperature. Arneg USA - Lexington, NC ANKARA... - Page 13 FLAMES BUT ONLY DRY CHEMICAL EXTINGUISHERS. ALL OTHER USES NOT EXPLICITLY INDICATED IN THIS MANUAL ARE CONSIDERED DANGEROUS AND THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR EVENTUAL DAMAGE RESULTING FROM IMPROPER, ERRONEOUS OR UNREASONABLE USE Arneg USA - Lexington, NC ANKARA...
-
Page 14: Etl Information
We reserve the right to change our technical specifications without notice. This brochure may not be reproduced, nor its contents disclosed to third parties without Arneg’s consent, and it is meant only for use by our customers. Photographs included in this publication are merely representative and in any case are not to be considered as binding.
Need help?
Do you have a question about the ANKARA and is the answer not in the manual?
Questions and answers