Related Manuals for Fujitsu UTY-RNRT
Summary of Contents for Fujitsu UTY-RNRT
- Page 1 OPERATION MANUAL (Simple) WIRED REMOTE CONTROLLER (for air conditioner) UTY-RNRT MODEL: Before using this product, read these instructions thoroughly and keep this manual for future reference. PART No. 9373329848-01...
-
Page 2: Table Of Contents
It may cause malfunction or failure. Do not use fire near this unit or place a heating apparatus nearby. It may cause malfunction. www.fujitsu-general.com/global/support/ Do not touch the switches with sharp objects. Doing so will cause injury, trouble, or electric shock. “QR Code” is a trademark or registered trademark of DENSO WAVE INCORPORATED. -
Page 3: Name Of Parts
screen. Refer to [2 CONTROL] → [2-2 Operation Set- ■ Name of parts tings] → [2-2-1 Set the Operation Mode]. (d) Set temp.: When this is touched, the display switches to the tem- perature setting screen. Refer to [2 CONTROL] → [2-2 Operation Settings] → [2-2-2 Set the Temperature]. When the operation mode is set Set Temp. to [Custom Auto], the set tem- perature is displayed for cooling 28.0°C 28.0°C Cool... -
Page 4: Control
2 CONTROL 2-2-2 Set the Temperature (1) Touch the [Set Temp.] on the monitor mode screen. 2-1 On and Off (2) “Set Temp.” screen is displayed. Adjust the room tem- (1) Press the [On/Off] button. perature with the [ ] or [ ]. Set Temp. Fri 10:00AM Fri 10:00AM Mode... -
Page 5: Zone Individual Operation
2-3-2 Zone Individual Operation 2-3-5 Zone Group Operation (1) Touch the [Zone Operation] on Zones registered to a group can be operated in bulk. Zone Select the “Zone Select” screen. Zone Sensor Priority Operation Method Sensor (1) Touch the [Zone Group Op- Zone Select Zone Group Operation eration] on the “Zone Select”... -
Page 6: Air Flow Direction Setting
(2) “Comfort” screen is displayed. 3-3-1 VT (Up/down) Air Flow Direction Comfort Touch the [On] or [Off] on the “Comfort” screen. (1) Touch the [VT Setting] on the “Air Flow Direction Set- ting” screen. (2) “VT Air Flow Direction Setting” screen is displayed. Touch Cancel [ ] or [ ] and set the air flow direction or “Swing”. When you touch the [OK], the data is transmitted to the indoor unit , and then the display returns to “Main Menu”... -
Page 7: Off Timer
Set the Operation Stop Time Enable the On Timer. (4) Touch the [Operation Stop time] on the “Off Timer” (2) “On Timer” screen is displayed. Touch the [Enable/Dis- screen. “Operation Stop Time” screen is displayed. able] on the “On Timer” screen. (5) Set the time by touching [ ] or [ ]. (3) “Enable/Disable”... -
Page 8: Special Setting
Set the time range of Auto Off Timer Apply the setting. (14) Touch the [OK] on the “Auto Off (6) Touch the [Time Range Setting] on the “Auto Off Timer” Auto Off Timer Fri 10:00AM Timer” screen. After the setting screen. Enable /Disable [Enable] change screen is displayed, (7) “Time Range Setting” screen is displayed. Touch the Operation Stop Time [In 30 min.] the display returns to the “Timer [Time Range] .
Need help?
Do you have a question about the UTY-RNRT and is the answer not in the manual?
Questions and answers