Page 1
REMOTE CONTROLLER (WIRED TYPE) OPERATION MANUAL (Simple) UTY-RNRYT5 Before using this product, read these instructions thoroughly. Also, keep this manual for future reference, together with the installation manuals for the indoor and outdoor units. PART No. 9373329930-01...
Page 2
Do not set vessels containing a liquid on this unit. Doing so will cause heating, fi re or electric shock. www.fujitsu-general.com/global/support/ Do not expose this unit directly to water. Doing so will cause trouble, electric shock or heating. “QR Code” is a trademark or registered trademark of DENSO WAVE INCORPORATED.
Page 3
screen. Refer to [2 CONTROL] → [2-2 Operation Set- ■ Name of parts tings] → [2-2-1 Set the Operation Mode]. When the operation mode Set Temp. is set to [Custom Auto], the set temperature is displayed Cool 28.0°C 28.0°C for cooling and heating. Heat 20.0°C 20.0°C...
Page 4
2 CONTROL 2-2-2 Set the Temperature (1) Touch the [Set Temp.] on the monitor mode screen. 2-1 On and Off (2) “Set Temp.” screen is displayed. Adjust the room tem- (1) Press the [On/Off ] button. perature with the [ ] or [ ]. Set Temp.
Page 5
3 SETTING (2) “Air Flow Direction Setting” Air Flow Direction Setting screen is displayed. When the [VT Setting] or [HZ Setting] is Setting Setting 3-1 Select the Setting Items touched, each setting screen is displayed. (1) Touch the [Menu] on the moni- Fri 10:00AM Back tor mode screen.
Page 6
Note 3-4 Timer Setting Up to 24 hours can be set. (1) Touch the [Timer Setting] on the “Main Menu” screen. (2) “Timer Setting” screen is displayed. Apply the setting. (6) Touch the [OK] on the “On On Timer Fri 10:00AM Timer Setting Timer”...
Page 7
3-4-3 Auto Off Timer (10) “Start Time” screen is displayed. Set the Start Time by touching [ ] or [ ] on the “Start Time” screen. (1) Touch the [Auto Off Timer] on Timer Setting (10) the “Timer Setting” screen. On Timer [Disable] When the “Password Verifi...
Page 8
• Economy: The temperature setting is off set automatically over a certain period of time. The power consumption is sup- pressed by setting the temperature high during cooling and low during heating. • Set Temp. Auto Return (for administrator) • Set Temp. Range Setting (for administrator) •...
Need help?
Do you have a question about the UTY-RNRYT5 and is the answer not in the manual?
Questions and answers