Easy Multi Monitor Feature; Jumpers Setup - ASROCK 775TWINS-HDTV - R2.0 User Manual

2.5 Easy Multi Monitor Feature

2.5 Easy Multi Monitor Feature 2.5 Easy Multi Monitor Feature
2.5 Easy Multi Monitor Feature 2.5 Easy Multi Monitor Feature
This motherboard supports Multi Monitor upgrade. With the onboard VGA and the
external add-on PCI Express VGA card, you can easily enjoy the benefits of Multi
Monitor Feature. If you plan to enable the function of Multi Monitor, please install
VGA card and VGA card drivers and then select the option "Surround View
Function" of BIOS to [Enabled] to enjoy multi-monitors.
This motherboard does not support Multi Monitor feature if you install
nVidia PCI Express VGA card. Please refer to page 34 of "User Manual"
in the support CD for details of "Surround View Function" option.

2.6 Jumpers Setup

2.6 Jumpers Setup
2.6 Jumpers Setup 2.6 Jumpers Setup 2.6 Jumpers Setup
The illustration shows how jumpers are
setup. When the jumper cap is placed on
pins, the jumper is "Short". If no jumper cap
is placed on pins, the jumper is "Open". The
illustration shows a 3-pin jumper whose pin1
and pin2 are "Short" when jumper cap is
placed on these 2 pins.
Jumper
PS2_USB_PWR1
(see p.2 No. 1)
Note: To select +5VSB, it requires 2 Amp and higher standby current provided by
power supply.
Clear CMOS
(CLRCMOS1, 3-pin jumper)
(see p.2 No. 22)
Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes
system setup information such as system password, date, time, and system
setup parameters. To clear and reset the system parameters to default setup,
please turn off the computer and unplug the power cord from the power
supply. After waiting for 15 seconds, use a jumper cap to short pin2 and pin3
on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right
after you update the BIOS. If you need to clear the CMOS when you just finish
updating the BIOS, you must boot up the system first, and then shut it down
before you do the clear-CMOS action.
1 4 1 4 1 4
1 4 1 4
ASRock 775Twins-HDTV Motherboard
Short
Setting
Default Clear CMOS
Open
Description
Short pin2, pin3 to enable
+5VSB (standby) for PS/2
or USB wake up events.