Expansion Slots (Pci, Hdmr, And Pci Express Slots); Installing An Expansion Card - ASROCK 775TWINS-HDTV - R2.0 User Manual

2.4 Expansion Slots (PCI, HDMR, and PCI Express Slots)

2.4 Expansion Slots (PCI, HDMR, and PCI Express Slots) 2.4 Expansion Slots (PCI, HDMR, and PCI Express Slots)
2.4 Expansion Slots (PCI, HDMR, and PCI Express Slots) 2.4 Expansion Slots (PCI, HDMR, and PCI Express Slots)
There are 2 PCI slots, 1 HDMR slot and 2 PCI Express slots on this motherboard.
PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
HDMR slot: The HDMR slot is used to insert an ASRock HDMR card with v.92
Modem functionality. The HDMR slot is shared with PCIE2 slot; you
can only choose either PCIE2 slot or HDMR slot to use.
PCIE Slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane
width graphics cards.
PCIE2 (PCIE x1 slot) is used for PCI Express cards, such as
Gigabit LAN card, SATA2 card, etc.

Installing an expansion card

Installing an expansion card Installing an expansion card Installing an expansion card Installing an expansion card
Step 1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the system unit cover (if your motherboard is already installed in
a chassis).
Step 3. Remove the bracket facing the slot that you intend to use. Keep the
screws for later use.
Step 4. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 5. Fasten the card to the chassis with screws.
Step 6. Replace the system cover.
ASRock 775Twins-HDTV Motherboard
1 3 1 3 1 3
1 3 1 3