WARNING: Ecler products have a long lifetime of more than 10 years. This product must never be discarded as unsorted urban waste, but must be taken to the nearest electrical and electronic waste treatment centre.
Key Safety Directions Read the following directions. 11. Only use attachments/accessories specified by the manufacturer. Keep the following directions. 12. Unplug the device during lightening Heed all warnings. sorts or when unused for long periods of Follow all directions. time. Do not use this device in proximity to Refer all servicing to qualified personnel.
Recycling materials and using non-contaminant components are also top priorities in our green crusade. Ecler has deeply evaluated and analyzed the environmental impacts of all the processes involved in the production of this product, including packaging, and has alleviated, reduced and/or compensated for them.
4. DESCRIPTION & FEATURES MIA Series is a family of elegant, unique and compact design column loudspeakers, built in a single aluminium piece to avoid vibrations and mechanical stress. MIA-81 includes 8x1.5” drivers with an RMS rating of 40W and MIA-82 includes 8x2.5” drivers with an RMS rating of 150W.
5. IMPEDANCE SELECTOR MIA Series has 2 impedance options (16Ω and 64Ω) to install more or less speakers in parallel. In this matter, it has a 2-position switch on its front panel (behind the logo) that allows to select its working mode without removing the grill.
6. CONNECTIONS The connection cables which connect the amplifiers output and the speaker should be of good quality, have sufficient conductor area and be as short as possible. The latter fact is especially important when the distance is long and the load impedance is 16 Ω. A cross-section of at least 2.5mm is recommended for distances up to 10m;...
Download all EASE files by clicking on the image: 9.2 Installation MIA Series loudspeakers include a wall-mount bracket. • MIA-81 includes a FLATY wall-mount bracket that allows the column to be mounted against the wall. • MIA-82 includes the incredibly versatile HANDY wall-mount smart pan and tilt bracket.
10. TECHNICAL DATA 10.1 Technical Specifications 10.1.1 MIA-81 MIA-81 SYSTEM Effective Freq. Range 175Hz-20kHz (-10dB) Coverage angle 235° x 58° (HxV) Power handling 40 W RMS / 160 W Peak Sensitivity 98 dB (1W/1m) Maximum SPL 114 dB continous / 120 dB peak Recommended amplifier power 80W RMS TRANSDUCERS...
10.1.2 MIA-82 MIA-82 SYSTEM Effective Freq. Range 165Hz-20kHz (-10dB) Coverage angle 165° x 41° (HxV) Power handling 150 W RMS / 600 W Peak Sensitivity 105 dB (1W/1m) Maximum SPL 127 dB continous / 133 dB peak Power options 100V: 160W (switched to 64 Ohm) 70V: 80W (switched to 64 Ohm) Recommended amplifier power 300W RMS...
10.2.2 MIA-82 All measurements are in mm. Ecler MIA-82 Mechanical Diagram 82,54 86,6 www.ecler.com 61-1123-0100...
Page 18
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. For technical queries contact your supplier, distributor or complete the contact form on our website, Support / Technical requests. Motors, 166‐168 08038 Barcelona, Spain Tel. (+34) 932238403 information@ecler.com www.ecler.com...
Need help?
Do you have a question about the MIA Series and is the answer not in the manual?
Questions and answers