Assa Abloy Norton 1600H Series Installation Instructions Manual

ASSA ABLOY
Non Handed Door Closer
Regular Arm
Installation
See Page 2
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Spring Power Adjustment Screw
1601 Series Only
"BC" Valve
1-4
Closer
Size
Stamp
Pinion Cap
Copyright © 2016 Yale Security Inc., an ASSA ABLOY Group company. All rights reserved.
Reproduction in whole or in part without the express written permission of Yale Security Inc. is prohibited.
Installation Instructions
1600H Series
Non Handed Door Closer
An Incorrectly installed or improperly adjusted
door closer can cause property damage or
personal injury. These installation instructions
should be followed to avoid the possibility of
misapplication or misadjustment.
NOTE: For special applications a separate
door and frame preparation template is
packed with these instructions. Use this
Top Jamb instruction sheet for installation sequence
Installation
and closer adjustments only.
See Page 5
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Parallel Arm Adjust closing time speed between 3 and 7
Installation
seconds from 90° to 0°.
See Pages
3 & 4
These door closers should NOT be
installed on the exposed side (weather
side) of exterior doors.
#7
Metal
Standard Components
Closer Body
"L"Valve
Tri-Style
3/16"
1/4-20
Wood
Set
Screw
Soffit Adapter Plate
"S"Valve
1
Hold Open Arm Models
Sized
(Sizes 3,4)
Weaker
-
1603BC-H
1604BC-H
Stronger
+
Top Jamb
Installation
See Page 5
Right Hand Door - RH
Left Hand Reverse - LHR
Parallel Arm
Installation
See Pages
3 & 4
Self Drilling Screws
Wood and Metal
For Wood drill 3/16 hole
Machine Screws
#7 Drill, 1/4-20 Tap
Arm
Assembly
Main Arm
1628H Soffit Plate
Used with Parallel
Arm Closers Only
80-9316-2532-020 Rev 1
Adjustable
(Sizes 1 thru 6)
ASSA ABLOY
1601H
Regular Arm
Installation
See Page 2
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
(Optional)
Sleeve Nut and Bolt
Drill 9/32 thru from Closer Side
3/8 Drill other side
Thru Bolt and Grommet Nut
Drill 9/32 thru from Closer Side
3/8 Drill other Side
Optional Components
C o
v e
r