Table of Contents
Advertisement
A-16
Bump Bar
With the KPS Bump Bar, the user can "bump" or delete an inputted order from the
queue. The Bump Bar is powered through the serial port from the KPS controller.
To connect the Bump Bar to the KC4, plug the cable to the Serial Port on the rear IO
panel.
Printer
Order information can be printed by attaching a printer to the KC4.
To connect a printer to the KC4, plug the printer cord into one of the USB ports on the
rear IO panel.
Note: Refer to your printer's user manual to determine which type of port connection it
requires.
Network
The KPS is designed to display kitchen order information to a Kitchen Monitor. The
orders originate from POS input and are sent to the Kitchen Controller 4 (KC4) through
the 10/100/1000 Mbps network interface.
To connect the network to the KC4, plug the cable to Ethernet port on the rear IO panel.
KC4 Kitchen Controller Cables
Advertisement
Table of Contents
Need help?
Do you have a question about the 1924-K006 and is the answer not in the manual?