NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for information that is applicable and current.
Power Supply Mounting Bracket Installation Procedure 1. Use the dimensions shown below or use the Power Supply Bracket as a template to mark the location of the holes. Secure the Bracket using four (4) wood screws. 2. Insert the Power Supply into the Bracket (Power Supply Cable end in first).
Page 5
Power Supply Mounting Bracket 3. Connect the Power Supply Cable to the Power In connector on the terminal. Note: For clarity, the Power Supply Bracket is not shown in the illustration below. 4. Connect the AC Power Cord to the Power Supply, then to an AC outlet. Caution: Do not connect or disconnect the Power Cable from the terminal with the AC Power Cord connected to an AC outlet.