Page 1
7600‐K310 Wall Mount Power Supply Bracket Kit Instructions Issue A...
Page 2
Revision Record Issue Date Remarks A Nov 2010 First issue ...
Page 3
Introduction This kit provides a bracket to mount a 7600/7601/7610/7611 power supply on a vertical surface or under a table top. 7600 Wall Mount Power Supply Bracket 497-0469772 28772 Installation Procedure 1. Secure the Wall Mount Bracket under a table top or vertical surface with the proper type of screws (4) for the surface type. Use the dimensions shown below or use the bracket as a template to mark the location of the holes. Note: If you are installing the bracket in a vertical position be sure to orient the bracket as shown below (eyelets in the screw holes pointing up). 102 mm 43 mm (4.0 in.) (1.7 in.) 127 mm (5.0 in.) 180 mm (7.1 in.) 28774 ...
Page 4
2. Insert the Power Supply into the Bracket (AC connector end in first). Horizontal Orientation (Under a Table Top) AC Connector Vertical Orientation 28775 3. Connect the AC Power Cord to the Power Supply. Cable Strain Relief Eyelets AC Power Cord 28776 4. Secure the cables to the Cable Strain Relief Eyelets with tie wraps. ...