Download
Share
Print this page
NCR SelfServ 90 Instructions Manual
  1. Manuals
  2. Brands
  3. NCR Manuals
  4. TV Mount
  5. SelfServ 90
  6. Instructions manual

NCR SelfServ 90 Instructions Manual

Second display mount
Hide thumbs Also See for SelfServ 90:

Advertisement

Quick Links

Download this manual
Kit Instructions
Second Display Mount
7709-K015
Issue A

Advertisement

loading

Related Manuals for NCR SelfServ 90

Summary of Contents for NCR SelfServ 90

  • Page 1 Kit Instructions Second Display Mount 7709-K015 Issue A...
  • Page 2 NCR, therefore, reserves the right to change specifications without prior notice. All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances, photographs are of equipment prototypes. Software screen images are representative, and in some cases, may not match a customer’s installed software exactly.

  • Page 3: Revision Record

    Revision Record Issue Date Remarks Jun 2019 First Issue...

  • Page 5: Kit Contents

    Second Display Mount This publication provides procedures for installing the Second Display Mount on an NCR SelfServ™ 90 (7709) Kiosk. Kit Contents Part Number Description 497-0525141 7709–K015 Second Display Mount 795-0267101 5910 Display Mount 497-0512559 Cable, Display Port, 1.3 meters 497-0521788 Cable, Latch-N-Lok, USB +12V to USB A Split RJ50/DB9, 1.28 meters...

  • Page 6: Installation Procedures

    1. Install the Second Display Mount on the Second Display unit. For more information, refer to Installing the Second Display Mount on the facing page. 2. Install the Second Display Assembly on the NCR 7709 kiosk. For more information, refer to Installing the Second Display Assembly on page 5.
  • Page 7 Second Display Mount Installing the Second Display Mount To install the Second Display Mount on the Second Display unit, follow these steps: 1. Place the Second Display on a flat surface with the back facing up as shown in the image below.
  • Page 8 M4 Screws. 4. Route the cables through the Second Display Mount hole as shown in the image below. 5. Install the Second Display Assembly to the NCR 7709 kiosk. For more information, refer to Installing the Second Display Assembly...
  • Page 9 1. Install the Second Display Mount on the Second Display unit. For more information, refer to Installing the Second Display Mount on page 3. 2. Insert the key into the NCR 7709 keylock, turn the key clockwise, and then carefully open the NCR 7709. 3. Remove four nuts securing the Second Display Blanking.
  • Page 10 Second Display Mount 4. Insert the Second Display cables through the NCR 7709 hole as shown in the image below. 5. Install and secure the Second Display Assembly on the NCR 7709 using four M4 nuts.
  • Page 11 Second Display Mount 6. Route the DB9 / USB Split Cable through cable loops and then connect to the Kiosk I/O Board as shown in the image below.
  • Page 12 Second Display Mount 7. Route the Display Port Cable through cable loops and then connect to the NCR 7709 Port. Ensure that cables are secured with cable ties as shown in the image below.

This manual is also suitable for:

7709