IMPORTANT SAFEGUARDS Before using the electrical appliance, the following basic precautions should always be followed including the following: 1. Read all instructions. 2. Make sure that your outlet voltage corresponds to the voltage stated on the rating label of the coffee maker.
Page 3
18. Scalding may occur if the cover is removed during the brewing cycles. 19. Some parts of appliance is hot when operated, so do not touch with hand. Use handles or knobs only. 20. Never leave the empty carafe on the warming plate otherwise the carafe is liable to crack. 21.
KNOW YOUR COFFEE MAKER BEFORE FIRST USE Check that all accessories are complete and the unit is not damaged. Add clean water up to maximum level to brew several times without coffee powder according to the steps below, and then discard the water. Wash the detachable parts thoroughly with warm water. USING YOUR COFFEE MAKER 1.
5. Plug the power cord into the outlet. 6. Pressing the switch down, the indicator will be illuminated. The appliance will begin working. Note1: during brewing process you may remove the carafe to serve for duration of not exceeding 30 seconds, and the coffee maker can stop dripping automatically. If the serve time exceeds 30 seconds the coffee will overflow the funnel.
REMOVING MINERAL DEPOSITS To keep your coffee maker operating efficiently, periodically you should clean away the mineral deposits left by the water according to the water quality in your area and the use frequency. We recommend decalcifying your coffee maker as follows, using a solution of white vinegar and cold water.
Page 7
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Need help?
Do you have a question about the R-929 and is the answer not in the manual?
Questions and answers