Rohnson R-98044 Instruction Manual
Rohnson R-98044 Instruction Manual

Rohnson R-98044 Instruction Manual

Multi capsule coffee machine

Advertisement

Quick Links

Instructions Manual
Multi Capsule Coffee Machine R-98044
Please read this Instruction Manual and the safety instructions before
operating the appliance.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the R-98044 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rohnson R-98044

  • Page 1 Instructions Manual Multi Capsule Coffee Machine R-98044 Please read this Instruction Manual and the safety instructions before operating the appliance.
  • Page 2: Safety Precautions

    Safety Precautions Before operation, please carefully read this Manual and pay attention to the following: • Before unplugging the power plug, please ensure that the machine is in a shutdown state. • Do not touch the power plug/socket/power supply or the machine when your hands are wet.
  • Page 3: Parts Information

    • Regularly check if the product is damaged. If damaged, please do not use it. • If the power cord, plug, or other components are damaged or the function fails, it is strictly prohibited to use the product. Please submit it to the designated maintenance center or service shop, for testing, maintenance, and replacement by dedicated personnel.
  • Page 4: Function Description

    Tips: The machine has different adaptors for different capsules, details refer to below: For Nespresso capsule adaptor For Dolce Gusto capsule adaptor For coffee powder adaptor Function description Function Description On/Off Use to switch on or off the Switch buttons button machine.
  • Page 5: Directions For Use

    Other functions: This is for capsules. After use for a period of time, the drip tray level will exceed (clean up the drip tray regularly). PULL OUT Pull out the drip tray box. Lift the drip tray box and clean out the inside. At the same time, clean up the drip tray in the inner part.
  • Page 6 Plug in the corresponding power supply. Press the On/Off Button. Indicator flashes, and the preheating starts. After preheating is finished, indicator stays on. 1. Place a cup (with a capacity of over 200mm) above the drip tray. 2. Click to select the desired coffee quantity, then click until coffee brewing is finished.
  • Page 7 Insert the adaptor into the machine. Make sure you put it into the end, then close the handle. Brew coffee 1. Place the cup above the drip tray. 2. Click to select the desired coffee quantity, then click until coffee brewing is finished. Note: When button is clicked, the light button will flash slowly, and the machine is brewing.
  • Page 8 Brew coffee 1. Place the cup above the drip tray. 2. Click to select the desired coffee quantity, then click until coffee brewing is finished. Note: When button is clicked, the light button will flash slowly, and the machine is brewing. The flashing process is normal because the machine is in a heating state.
  • Page 9: Energy-Saving Mode

    Brew coffee 1. Place the cup above the drip tray. 2. Click to select the desired coffee quantity, then click until coffee brewing is finished. Note: When button is clicked, the light button will flash slowly, and the machine is brewing. The flashing process is normal because the machine is in a heating state.
  • Page 10 Pre-brewing mode Setting 1 of Pre-brewing mode When the machine is working, press hold for 3 seconds. Then it will beep, and only button lights stay on. ● After is clicked, the light button stays on, and the pre-brewing mode is started. After is clicked, the light button flashes slowly, and the pre-brewing mode is ●...
  • Page 11: Descaling Mode

    Descaling mode Points for Place a cup at the water outlet in front of the machine. Attention Put an appropriate amount of scale remover into the water tank. When the machine When the machine is working, press and hold for 3 makes no more than 400 cups of coffee, it seconds.
  • Page 12 Solutions for water failure Problem: When the machine is used for the first time, or is not used for a long time, the inside of the pump is dry, resulting in no water coming out of the machine. Solution: Fill the machine with water from the manual air pump in the machine accessories.
  • Page 13: Points For Attention

    Points for attention ➢ Do not directly pour water onto the machine. ➢ There is still a residual heat after brewing coffee. CAUTION! HOT! Troubleshooting Problem Possible cause Solution 1. Check if the power connector is properly plugged in. Indicator lamp is not on. The power supply is not 2.
  • Page 14 IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2012/19/EU. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection center or to a dealer providing this service.

Table of Contents