Advertisement
Sensor Controllers
Functions
Status indicators
Main display
Segment display
Sub-display
LCD
Setting keys
Setting inputs
Slide switch
Power supply voltage
Current consumption
Ambient temperature
Ambient humidity
Materials
Weight
Accessories
ZS-MDC11/MDC41 Multi-Controllers
Basic specifications are the same as those for the
Sensor Controllers.
The following points, however, are different.
(1) Sensor Heads cannot be connected.
(2) A maximum 9 of Controllers can be connected.
Control Link Units are required to connect Con-
trollers.
(3) Processing functions between Controllers:
Math functions
Data Storage Units
Sensor Controllers
Number of mounted Sensor Heads
Number of connectable Controllers
Connectable Controllers
Connection method
USB 2.0
Serial I/O
RS-232C
External
Outputs
interface
Inputs
Data resolution
Logging trigger functions
Functions
Other functions
Status indicators
Segment display
LCD
Setting keys
Setting inputs
Slide switch
Power supply voltage
Current consumption
Ambient temperature
Ambient humidity
Materials
Weight
Accessories
*1.
Control Link Units are required to connect Controllers.
Model
ZS-LDC11
Display:
Measured value, threshold value, voltage/current, received light amount, and resolution
Sensing:
Mode, gain, measurement object, head installation
Filter:
Smooth, average, and differentiation
Outputs:
Scaling, various hold values, and zero reset
I/O settings: Linear (focus/correction), judgements (hysteresis and timer), non-measurement, and bank
(switching and clear)
System:
Save, initialization, measurement information display, communications settings, key lock, lan-
guage, and data load
HIGH (orange), PASS (green), LOW (orange), LDON (green), ZERO (orange), and ENABLE (green)
16 digits x 2 rows, Color of characters: green, Resolution per character: 5 x 8 pixel matrix
Direction keys (UP, DOWN, LEFT, and RIGHT), SET key, ESC key, MENU key, and function keys (1 to 4)
Threshold switch (2 states: High/Low), mode switch (3 states: FUN, TEACH, and RUN)
Operating: 0 to 50°C, Storage: –15 to 60°C (with no icing or condensation)
Approx. 280 g (excluding packing materials and accessories)
Controller Link Unit
Connection Using
the ZS-XCN
Model
ZS-DSU11
10 Controllers max. (ZS-MDC: 1 Controller, ZS-LDC: 9 Controllers max.)
Serial I/O: connector, Other: pre-wired (standard cable length: 2 m)
3 outputs: HIGH, PASS, and LOW
NPN open-collector, 30 VDC, 50 mA max.,
residual voltage: 1.2 V max.
ON: Short-circuited with 0V terminal or 1.5 V or less
OFF: Open (leakage current: 0.1 mA max.)
Start and stop triggers can be set separately; external triggers, data triggers (self-triggers), and time triggers
External banks, alarm outputs, saved data format customization, and clock
OUT (orange), PWR (green), ACCESS (orange), and ERR (red)
16 digits x 2 rows, Color of characters: green, Resolution per character: 5 x 8 pixel matrix
Direction keys (UP, DOWN, LEFT, and RIGHT), SET key, ESC key, MENU key, and function keys (1 to 4)
Threshold switch (2 states: High/Low), mode switch (3 states: FUN, TEACH, and RUN)
Operating: 0 to 50°C, Storage: –15 to 60°C (with no icing or condensation)
Approx. 280 g (excluding packing materials and accessories)
Ferrite core (1) Instruction Sheet, Tools for Data Storage Unit: CSV File Converter for Data Storage Unit,
Smart Analyzer Macro Edition (Excel macros for analysis of collected data)
8-segment red LED, 6 digits
8-segment green LED, 6 digits
21.6 V to 26.4 VDC (including ripple)
0.5 A max. (when Sensor Head is connected)
Operating and storage: 35% to 85% (with no condensation)
Case: Polycarbonate (PC)
Ferrite core (1), Instruction Sheet
Controller Link Unit
Data Storage Unit
Multi-Controller
Cannot be connected
ZS-LDC@@, ZS-MDC@@
1 port, Full Speed (12 Mbps), MINI-B
1 port, 115,200 bps max.
ON: Short-circuited to supply voltage or within 1.5 V of
32 bits
8-segment green LEDs, 6 digits
21.6 V to 26.4 VDC (including ripple)
0.5 A max.
Operating and storage: 35% to 85% (with no condensation)
Case: Polycarbonate (PC)
Displacement sensors / Width-measuring Sensors
ZS-LDC41
Sensor Controllers
ZS-DSU41
*1
3 outputs: HIGH, PASS, and LOW
PNP open-collector, 50 mA max.,
residual voltage: 1.2 V max.
supply voltage
OFF: Open (leakage current: 0.1 mA max.)
Advertisement
