Logging at a Fixed Cycle
Logging is performed at a specified time cycle.
FUN mode-[SOURCE]-[LOGGING]-[TIME]
Setting value
00:00:00
Logging at Individual Fixed Counts
Logging is performed at a specified count interval.
FUN mode-[SOURCE]-[LOGGING]-[POINT]
Setting value
1 - 999,999
Specify the Logging Cycle by an External
Signal
All data is logged continuously for the duration that the TRIG signal is ON.
Note
•Logging is also performed while function key 1 is held down.
•This key can be used as a substitute for the trigger signal.
FUN mode-[SOURCE]-[LOGGING]-[TRIGGER]
ZG2-DSU User's Manual
Description
Specifies the time interval.
Description
Sets the count interval. (default value: 1)
Setting Logging Conditions
33