Attaching The Ferrite Core; Connecting The Power Supply - Omron ZG2-DSU User Manual

Attaching the Ferrite Core

Ferrite core

Connecting the Power Supply

H H L D L D
O N O N
Z E Z E
P P R O R O
E N E N
A B A B
L E L E
L L
ZG2-DSU User's Manual
1
Attach the ferrite core (supplied)
to the Data Storage Unit's I/O
cable.
1
Connect the power wire (brown)
and GND wire (blue) of the Sensor
Controller's I/O cable to the 24
±
VDC ( 10%) power supply.
Note
The following power supply is recommended:
• S8VS-03024 (24 VDC, 1.3 A)
Be sure to connect the Data Storage Unit to
the power supply in a 1:1 connection.
Mounting and Connecting Devices
19