Saving Setup Data
Bank settings and system settings made on the Data Storage Unit can be saved internally
on the Data Storage Unit.
Important
•The settings of all banks are saved regardless of the currently selected bank No.
•After you have made settings, be sure to save the setup data. All settings will be deleted if
you turn the power OFF without saving the data. A message prompting you to save data will
be displayed if you change the operation mode without saving data after you have changed
settings.
1
SOURCE
3
BANK
1
EJECT
3
INIT
Save the data?
1
OK
Is it all right?
1
OK
SYSTEMDATA SAVE
Executed
24
Saving Setup Data
FUN
RUN
TEACH
2
I/O SET
4
SYSTEM
2
SAVE
←→
2
CANCEL
2
CANCEL
1
Switch to the FUN mode.
2
Select [SYSTEM].
3
Select [SAVE].
4
Select [OK].
The final confirmation message is
displayed.
5
Select [OK].
The settings are saved, and the
"SYSTEMDATA SAVE Executed"
message is displayed.
ZG2-DSU User's Manual