Inserting And Removing Memory Cards - Omron ZG2-DSU User Manual

Inserting and Removing Memory Cards

Important
The following Memory Cards can be used on this unit.
•F160-N128S (128 MB)
•F160-N256S (256 MB)
Inserting Memory Cards
Protective
dummy card
EJECT button
Memory Card
Removing Memory Cards
Important
Before removing a Memory Card from the unit, make sure that the CF power LED and access
LED are both OFF. If a Memory Card is removed with these LEDs still ON, there is the
possibility that data stored on the Memory Card might be lost or the Memory Card or Data
Storage Unit might malfunction.
1 SOURCE
3 BANK
1 EJECT
3 INIT
20
Mounting and Connecting Devices
FUN RUN
TEACH
2 I/O SET
4 SYSTEM
2 SAVE
←→
1
Press the EJECT button at the
side of the Memory Card slot.
2
Remove the protective dummy
card from the unit.
3
Insert the Memory Card.
1
Switch to the FUN mode.
2
Select [SYSTEM].
3
Select [EJECT].
ZG2-DSU User's Manual