Logging Procedure
Step 1
Select the logging target.
Step 2
Set conditions to be used for
logging.
Step 3
Start logging.
Step 4
End logging.
Step 5
Load logging data to the PC.
26
Logging Procedure
Measurement value p.31
Profile p.31
Only at an NG/only at an OK p.32
Log by all conditions p.32
Log at a fixed cycle p.33
Log at individual fixed counts p.33
Specify the logging cycle by an
external signal p.33
Starting logging p.34
Ending logging p.34
Removing the Memory Card and
copying logging data to a PC p.35
Loading logging data to a PC by
serial communication commands
p.35
ZG2-DSU User's Manual