Omron WS02-9094G - V1.0 Operation Manual page 55

CS1/CJ1W-PRM21 PROFIBUS Master DTM
Monitor Tab
Master Status Tab
40
The figure below shows an example of the DTM Diagnostics User Interface.
The DTM Diagnostics User Interface contains two tabs:
• The Monitor tab
This tab displays all Master Unit status and error information as well the
overall slave status information, which resides in the Master Unit.
• The Online Operations tab
This tab contains controls to initiate state changes in the Master Unit as
well as transmit Global-Control messages over the PROFIBUS network.
The DTM Diagnostics User Interface - Monitor tab contains three sub-tabs:
• Master Status tab.
• Slave Status tab.
• Error History tab.
Also, the Diagnostics data refreshing mode can be selected.
• Automatic
The Diagnostics data is constantly retrieved from the Unit.
• Manual
The Diagnostics data is retrieved only once from the Unit, when pressing
the Manual button.
The Master Status tab (shown in the figure above) contains Diagnostics infor-
mation regarding the Master Status. Each of the four status boxes, is related
to one of the Unit's status words in the PLC CIO Area Memory (refer to the
CS1/CJ1W-PRM21 Operation Manual, W409-E2-@).
The status is indicated by red or green LED indicators. Red indicates an error
situation, green indicates a status indication. The LED indicators are listed in
the table below.
Section 2-3