Table of Contents
Advertisement
Setting
<A1SJ71UC24-R2, A1SJ71C24-R2> (RS-232C dedicated)
Transmission control protocol setting
Set to "1".
"Write during run" enable/disable setting (SW04)
Set to "ON" (enabled).
Transmission speed setting (SW05 to SW07)
9,600bps
19,200bps
Data length setting (SW08)
Set to "OFF" (7 bits).
Parity check yes/no setting (SW09)
Set to "ON" (yes).
Parity (odd/even) setting (SW10)
Set to "ON" (even).
Stop bit setting (SW11)
Set to "ON" (2 bits).
Sum check yes/no setting (SW12)
Set to "ON" (yes).
SW05 SW06 SW07
ON
OFF
ON
OFF
ON
ON
Chapter 2-3
2-15
Advertisement
Table of Contents
