Omron NT21 - SETUP MANUAL 10-2001 Setup Manual page 75

Connecting to the RS-232C Port at the Host
Wiring for a Host Link
Unit (25-pin) Connection
64
Name Model
XM2S-0911
Connector
XM2S-0913
hood hood
XM2S-0911-E
XM2S-2511
AWG28 5P
IFVV-SB
Cable
CO-MA-VV-SB
5P 28AWG
Note After connecting a communication cable, always secure it with the screws.
Otherwise the cable may disconnect, causing operation to fail.
OMRON Cables with Connectors
The OMRON cables listed below can be used when connecting with a method
other than the memory link method.
Model
XW2Z-200S
XW2Z-500S
XW2Z-200T
XW2Z-500T
The OMRON cable listed below can be used when connecting to a personal
computer with the memory link method.
Model
XW2Z-S002
Note The cable's tensile load is 30 N. Do not subject it to loads greater than this.
Otherwise a discontinuity may occur, causing operation to fail.
Applicable Units: C200H-LK201-EV1
Compatible cables with attached connectors:
XW2Z-200S (9-pin
XW2Z-500S (9-pin
CVM1/CV-series Host Link Units (CV500-LK201) have two types of connector; a
25-pin connector (communication port 1), and a 9-pin connector (communica-
Remarks
9-pin
Made by OMRON
9-pin
Made by OMRON
9-pin
Made by OMRON
25-pin
Made by OMRON
Multi-core shielded cable
Made by Fujikura, Ltd.
Multi-core shielded cable
Made by Hitachi Cable,
Ltd.
Cable Length
2 m
5 m
2 m
5 m
Cable Length
2 m
CV500-LK201 (communication port 1)
⇔
25-pin, 2 m)
⇔
25-pin, 5 m)
Section
Delivered with
C-series CQM1,
C200HS,
C200HX/HG/HE-(Z)E,
CVM1/CV-series CPU
Units
CV500-LK201
---
CS-series CS1G/CS1H,
CS1G-H/CS1H-H
CJ-series CJ1G
CV500-LK201
C200H-LK201-EV1
---
---
Connector Specification
9 pin ⇔ 25 pin 9-pin ⇔ 25 pin
9 pin ⇔ 9 pin 9-pin ⇔ 9-pin
Connector Specification
9-pin ⇔ 9 pin
4-1