Summary of Contents for Horizon Hobby Axial JEEP WRANGLER JLU
Page 1
AXI00002V3T3/T4 axialadventure.com JEEP WRANGLER JLU 1/24 SCALE SCX24 4WD ROCK CRAWLER READY-TO-RUN Scan and select the Manuals and Support quick links from the product page for the most up-to-date manual information. Scannen Sie und wählen Sie auf der Produktseite die Quicklinks Handbücher und Unterstützung, um die aktuellsten Informationen zu Handbücher.
Page 2
This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance.
WATER-RESISTANT VEHICLE WITH WATERPROOF ELECTRONICS Your new Horizon Hobby vehicle has been designed and built with a combination of waterproof and water-resistant components to allow you to operate the product in many “wet conditions,” including puddles, creeks, wet grass, snow and even rain.
WET CONDITIONS MAINTENANCE • Drain any water that has collected in the tires by spinning them at high speed. With the body removed, place the vehicle upside down and pull full throttle for a few short bursts until the water has been removed. CAUTION: Always keep hands, fingers, tools and any loose or hanging objects away from rotating parts when performing the above drying technique.
• Always disconnect the battery after charging, and let the charger cool between charges. • Always charge in a well-ventilated area. • Always terminate all processes and contact Horizon Hobby if the product malfunctions. • Charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property.
TRANSMITTER LAYOUT Use the diagram below to familiarize yourself with the different parts of your transmitter. The transmitter antenna is mounted internally and is located in the front portion of the transmitter. When you are driving your model, hold the transmitter so it is oriented as close to vertical as possible. Do not try to follow your model with the transmitter.
INSTALL THE TRANSMITTER BATTERIES 1. Press the battery compartment latch and rotate the batter cover to open. 2. Install 4 AA alkaline batteries, verifying correct polarity. 3. Close the battery cover until it latches. CAUTION: NEVER remove the transmitter batteries while the vehicle is powered ON.
POWER ON THE VEHICLE TEST THE CONTROLS With the vehicle wheels off the ground, test the throttle and steering controls. Ensure the wheels spin in the proper direction and the front wheels turn in the proper direction with steering input. After checking for proper direction of controls, start driving slowly.
AFTER DRIVING When you are finished driving your vehicle: 1. Power off the vehicle. 2. Power off the transmitter. 3. Remove the vehicle battery and charge if necessary. BINDING THE TRANSMITTER AND RECEIVER Binding is the process of programming the receiver to recognize a specific transmitter signal, thus preventing interference from other transmitters.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Batteries are not installed properly in the Ensure the transmitter batteries are properly transmitter installed Weak or no battery in the vehicle Install a freshly charged vehicle battery Vehicle does not move Damaged motor Replace the motor Frayed or broken wiring Replace any damaged wiring ESC is shut down by heat protection circuit...
LIMITED WARRANTY What this Warranty Covers – Horizon Hobby, LLC, (Ho- WARRANTY SERVICES rizon) warrants to the original purchaser that the product Questions, Assistance, and Services – Your local purchased (the “Product”) will be free from defects in hobby store and/or place of purchase cannot provide war- materials and workmanship for a period of 2 years from ranty support or service.
If this equipment does cause Supplier’s Declaration of Conformity harmful interference to radio or television reception, Axial Jeep Wrangler JLU 1/24 Scale SCX24 4WD which can be determined by turning the equipment Rock Crawler RTR (AXI00002V3T3/T4) off and on, the user is encouraged to try to correct the...
COMPLIANCE INFORMATION FOR THE EUROPEAN UNION EU Compliance Statement: Axial Jeep Wrangler JLU 1/24 Scale EU Manufacturer of Record: SCX24 4WD Rock Crawler RTR Horizon Hobby, LLC (AXI00002V3T3/T4): Hereby, Horizon Hobby, LLC declares...
Need help?
Do you have a question about the Axial JEEP WRANGLER JLU and is the answer not in the manual?
Questions and answers