Summary of Contents for Horizon Hobby axial AX24 XC-1
Page 1
Scannerizzare il codice QR e selezionare i Link veloci Manuali e Supporto dalla pagina del prodotto per le informazioni manuali più aggiornate. Before operating this vehicle, please read all printed materials thoroughly. Horizon Hobby is not responsible for inadvertent errors in this manual. INSTRUCTION MANUAL BEDIENUNGSANLEITUNG MANUEL D’UTILISATION...
Page 2
This product is not intended for use by children without direct adult supervision. Do not use with incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This manual contains instructions for safety, operation and maintenance.
• Always disconnect the battery after charging, and let the charger cool between charges. • Always charge in a well-ventilated area. • Always terminate all processes and contact Horizon Hobby if the product malfunctions. • Charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting in injury to persons and/or damage to property.
TRANSMITTER FUNCTIONS Specifications A. A. Power Supply: 4 AA Batteries Operating Frequency: 2.4GHz Transmit Power: <100mw Control Protocol: SLT Control: Proportional Steering and Throttle/Brake with Trim Knobs, Third Channel with Three Position Switch. Auxiliary Functions: Three Position Throttle Limit Switch, Steering Rate Knob to Change Steering Travel on-the-fly, Programmable Servo Travel for Steering and Throttle/Brake.
SERVO TRAVEL The servo travel on the Steering and Throttle channels can be adjusted through a special programming mode in the transmitter. 1. Begin with the transmitter binding process to the 4. Turn the wheel to the right and repeat the process to receiver complete.
POWER ON THE VEHICLE TEST THE CONTROLS With the vehicle wheels off the ground, test the throttle and steering controls. Ensure the wheels spin in the proper direction and the front wheels turn in the proper direction with steering input. After checking for proper direction of controls, start driving slowly.
AFTER DRIVING When you are finished driving your vehicle: 1. Power off the vehicle. 2. Power off the transmitter. 3. Remove the vehicle battery and charge if necessary. BINDING THE TRANSMITTER AND RECEIVER Binding is the process of programming the receiver to recognize a specific transmitter signal, thus preventing interference from other transmitters.
USB Charger LiPo LIMITED WARRANTY What this Warranty Covers service by anyone other than a Horizon Hobby authorized Horizon Hobby, LLC, (Horizon) warrants to the original service center, (v) Product not purchased from an authorized purchaser that the product purchased (the “Product”) will...
Page 11
FOR A PARTICULAR PURPOSE. THE PURCHASER the Product securely using a shipping carton. Please ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED note that original boxes may be included, but are not THAT THE PRODUCT WILL SUITABLY MEET THE designed to withstand the rigors of shipping without REQUIREMENTS OF THE PURCHASER’S INTENDED USE.
Supplier’s Declaration of Conformity which can be determined by turning the equipment Axial AX24 XC-1 1/24 4WD RTR (AXI00003T1/T2) off and on, the user is encouraged to try to correct the This device complies with part 15 of the FCC interference by one or more of the following measures: Rules.
COMPLIANCE INFORMATION FOR THE EUROPEAN UNION EU Compliance Statement: Axial AX24 XC-1 1/24 4WD RTR EU Manufacturer of Record: (AXI00003T1/T2); Hereby, Horizon Hobby, Horizon Hobby, LLC LLC declares that the device is in compliance with the 2904 Research Road following: EU Low Voltage Directive 2014/35/EU; EU EMC Champaign, IL 61822 USA Directive 2014/30/EU;...
EXPLODED VIEWS // EXPLOSIONSZEICHNUNGEN // VUES ÉCLATÉES // VISTE ESPLOSE AXI203001 AXI202001 AX24 Shock Set (assembled) Driveshaft Set: AX24 AX24 Stoßdämpfersatz (montiert) Antriebswellensatz: AX24 Ensemble d’amortisseurs AX24 (assemblés) Ensemble d’arbre AX24 Set ammortizzatori (assemblati) de transmission: AX24 Set albero di trasmissione: AX24 AXI31608 SCX24 Transmission (assembled) SCX24 Getriebe (montiert)
Page 15
AXI31609 SCX24 Front Axle (assembled) SCX24 Vorderachse (montiert) Essieu avant SCX24 (assemblé) SCX24 Assale anteriore (assemblato) AXI204004 Note: Same assembly used for the front and rear Link Set: AX24 Hinweis: Gleiche Anordnung für vorne und hinten Verbindungssatz: AX24 Remarque : Le même assemblage est utilisé pour Jeu de liens : AX24 l’avant et l’arrière Kit leveraggi: AX24...
Need help?
Do you have a question about the axial AX24 XC-1 and is the answer not in the manual?
Questions and answers