Specifications - KIP 600 Service Manual

1. 2

Specifications

Model
Scanning method
Reading sensors
Light source
Setting
Starting point of scan
Original width
Original thickness
Margin
Resolution
Color mode
Scanning speed
(on 600 dpi)
Resolution
Interface
Input power
Power consumption
Environmental conditions
Acoustic noise
Outer dimension
Weight
NOTE
These specifications are subject to change without notice.
KIP 600
Sheet through type
Contact Image Sensor
(for A4 size x 5 pieces in staggered arrangement)
LED (R/G/B)
Face up
Center
257-914 mm (11" – 36" )
0.05 -1.6mm
3.5 to 4.5mm from leading / trailing edge
600dpi
Monochrome : Binary
Grayscale : 4 bit / 8 bit
Color : 24 bit
Monochrome : 65mm/s
Grayscale : 65mm/s
Color : 22mm/s
600dpi
USB 2.0 (Maximum: 5VDC)
Voltage: 100-240VAC
Current: 1A
Frequency: 50/60Hz
NOTE
The KIP 600 accepts the inlet voltages of 100 to 240VAC
without additional voltage transform.
60W maximum
10-32 degrees centigrade, 20-85%RH (Non condensing)
60 db or less (during 65mm/s scan operation)
1,097mm (Width) x 408mm (Depth) x 170mm (Height)
Approximately 24kg ( 53 lbs)
1-3 K110sm1e1.doc