Related Manuals for RATTAN LALI
Summary of Contents for RATTAN LALI
- Page 1 LALI Dining Chair Assembly Instructions Part 1. After Opening the box, lay out and separate all the pieces. *There are 12 washers where only 8 are required for the proper assembly of the Lali Dining Chair...
- Page 2 2. Set-up side (X) as per the Image below by screwing part g into the bottom holes and inserting e into the wider holes. 3. Attach Seat (S) and supports (U x 2) to Side (X) using tools (a) and (b). *Tightening screws (f) can be fiddly using tool (b) so we would advise tightening the screw as far as you can with fingers before using the tool.
- Page 3 Once done – it should look like this: 4. Attach the top backrest to side (X)
- Page 4 6. Now you have one side of the chair connected, set-up for the attachment of the other side (Y) as below - screwing parts (g) into the lower holes of side (Y) and inserting the wooden pegs (e) to the seat side.
- Page 5 7. Finish attaching side (Y) by repeating instruction no. 3 8. Attach side (Y) to top backrest (T) by repeating instruction no. 4...
- Page 6 9. The Lali Dining Chair is now fully assembled. Please make sure all the screws and nuts are fully tightened using the tools (a) and (b) provided. ENJOY!
Need help?
Do you have a question about the LALI and is the answer not in the manual?
Questions and answers