Radio Operation - Aiwa CDC-X227 YZ Operating Instructions Manual

Setting the clock
1
Press and hold DISP until the clock indicator
flashes on the display.
2
Press i (to set hour) or k (to set minute), and
then turn AUDIO CONTROL.
3
Press DISP.
Displaying the clock
1
Press DISP.
To return to the former display, press DISP again.

RADIO OPERATION

Tuning in to a station
(Seek/Manual Tuning)
LO
i/k
BAND
Stereo indicator
Band indicator Frequency indication
1
Press BAND repeatedly to select the desired band
(FM1, FM2, FM3, MW, or LW).
2*
Press i (to move to higher frequencies) or k (to
move to lower frequencies) to tune in to a station.
"ST" appears on the display when an FM station is
broadcasting in stereo, and receiving conditions are
good.
*Seek Tuning and Manual Tuning
• Press and hold i or k until seek Tuning starts.
The unit locates a station automatically (Seek Tuning).
• Press i or k repeatedly to search for a desired
station while increasing or decreasing the frequency
step by step (Manual Tuning).
To stop Seek Tuning, press i or k again.
Monaural mode
When FM signals become weak, or FM reception
becomes poor, the unit automatically switches to
Monaural mode to reduce noise.
Local mode
Local mode allows you to tune on only to strong stations
during Seek Tuning.
1
To return to Distant mode, press LO again.
"LO" disappears and the unit tunes in to all receivable
stations.
Using preset stations
You must preset stations before you can tune in to a
station using preset station number buttons.
Local indicator
Presetting stations automatically
(Auto Memory)
1
2
To cancel automatic presetting, press PS/A.ME again.
Checking the preset stations (Preset Scan)
1
To cancel Preset Scan, press PS/A.ME again or any
preset station button.
Press LO before you start seek tuning.
"LO" appears on the display.
i/k
PS/A.ME
BAND
Press BAND repeatedly to select the desired band
(FM1, FM2, FM3, MW, or LW).
Press and hold PS/A.ME until automatic presetting
starts.
The unit automatically stores up to 6 stations for
each band.
After completion of automatic presetting, the unit
tunes in to the station stored on preset station
button 1.
Press PS/A.ME briefly.
Each preset station will be tuned in for 5 seconds in
order.
Preset station buttons 1 to 6
Preset station number
ENGLISH
4