Setting The Clock; Radio Operation - Aiwa CD-CX126 Operating Instructions Manual

SETTING THE CLOCK

1
Press PWR to turn the unit on.
2
Press and hold DISP for more than 2
seconds.
3
Press TUNE k to set the hour.
Press TUNE i to set the minute.
4
Press DISP.
The clock starts working from 0 second.
Having the clock displayed while the unit is
turned on
Press DISP.
To return the unit to its former display, press
DISP again. The former display is restored after
5 seconds even if you don't press DISP.
5
ENGLISH

RADIO OPERATION

1
Press PWR to turn the unit on.
2
Press BAND to select the band from
among FM1, FM2, FM3, MW1 (AM1),
MW2 (AM2) and LW.
The band indicators appear cyclically in order.
• FM1, FM2 and FM3 share the same
frequency range.
• MW1 (AM1) and MW2 (AM2) share the
same frequency range.
Band indicator Frequency indication
3
Press (more than 2 seconds) either
TUNE k or TUNE i to tune in the desired
station.
The unit starts scanning and tunes in a station
automatically (seek tuning).
Press TUNE k to decrease and TUNE i to
increase the frequency.
Press the button again to cancel the function.
Repeat the procedure until the desired station
is tuned in.
Note
If you press (less than 0.5 second at a time)
either TUNE k or TUNE i, the frequency
decreases or increases step by step.
4
Adjust the volume with +/-.