Setting The Clock.5; Radio Operation - Aiwa CDC-MP3 YU Operating Instructions Manual

SETTING THE CLOCK RADIO OPERATION
IQ'^Z®
i
-
—
i oY
f{
1,3
2
To turn the unit on
You cai n turn the unit : on by pressing any
button t jn the front panel except OPEN and
the Jog Dial.
1 With the unit on, press and hold SELECT
for more than 2 seconds until the clock
indication appears.
_.\\>l<//
m
'I I\\
2 Press TUNE A, then rotate the Jog Dial
to set the hour.
Press TUNE ▼, then rotate the Jog Dial
to set the minute.
Rotate the Jog Dial clockwise to go forward.
Rotate the Jog Dial counterclockwise to go
backward.
3 Press SELECT.
The clock starts working from 0 second.
To have the clock displayed when the unit is on
Press DISP. To return the unit to its former
display, press DISP repeatedly.
1
3 2
1 Press FUNCTION repeatedly to select
the band from among FI (FM1), F2
(FM2), F3 (FM3), A1 (AMI) and A2 (AM2).
The band indications appear cyclically in
• FI, F2 and F3 share the same frequency
■ A1 and A2 share the same frequency range.
Band Frequency
rirafi i
2 Press (and hold for more than 2
seconds) either TUNE A or TUNE ▼ to
tune in the desired station.
The unit starts scanning and tunes in astation
automatically (seek tuning).
Press TUNE A to increase and TUNE T to
decrease the frequency.
Press the button again to cancel seek tuning.
Repeat the procedure until the desired station
Note
If you press (for less than 0.5 second at a
time) eitherTUNE AorTUNE ▼, thefrequency
increases or decreases step by step.
3 Adjust the volume with the Jog Dial.
5 ENGLISH