Subscribe to Our Youtube Channel
Related Manuals for FONESTAR ASH-103U
Summary of Contents for FONESTAR ASH-103U
- Page 1 ASH-103U, ASH-203U PORTABLE AMPLIFIER WITH WIRELESS UHF MICROPHONE SYSTEM AND USB/MP3 PLAYER INSTRUCTION MANUAL...
- Page 2 AWe take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
-
Page 3: Exemption Of Liability
The characteristics of the equipment and the content of the manual can change without forewarning. FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the information supplied in this instruction manual, and specifically disclaims any implied liability for marketability or fitness for any other use. -
Page 4: Controls And Functions Rear Panel
DESCRIPTION THIS MANUAL CORRESPONDS TO THE FOLLOWING MODELS: ASH-103U Portable amplifier 100 W RMS, energy efficient class D circuit amplifier. 2 UHF receivers with 1 wireless hand-held microphone and 1 tie-clip microphone with wireless belt-pack transmitter. ASH-203U Portable amplifier 200 W RMS, energy efficient class D circuit amplifier. 2 UHF receivers with 1 wireless hand-held microphone and 1 tie-clip microphone with wireless belt-pack transmitter. - Page 5 7.- MIC/LINE: MIC/LINE combined input volume control. 8.- Button which allows this input to be selected as a mic. or line level input. 9.- Mic/line level balanced input, combo connector (XLR and 6.3 mm jack). 10.- Line level aux input, 2 x RCA connectors. 11.- MASTER: output volume control of the final mix of all the inputs.
-
Page 6: Hand-Held Microphone
HAND-HELD MICROPHONE 1.- Battery compartment cover. Unscrew this cover to access the battery compartment. Use 2 batteries type LR6-AA, preferably alkaline. When inserting the batteries, make sure that the polarity is correct. 2.- Screwdriver to access and adjust the microphone’s gain control. 3.- GAIN: microphone’s gain control. -
Page 7: Connection And Operating
CONNECTION AND OPERATING Before making any connections make sure that all the devices are switched off and disconnected from the power supply. The basic connections are as follows: 1.- Combined input (MIC/LINE): connect a microphone or a line level source according to your needs. The input has a combo connector (XLR and 6.3 mm jack). - Page 8 PRIORITY The wireless microphones and the combined input MIC/LINE have priority over the rest of the inputs. When a signal is present in the wireless microphones or in this input, the rest of the inputs will be cut off. To activate the priority press the VOICE PRIORITY button located on the rear panel of the device. To deactivate it, press it again.
-
Page 9: Technical Specifications
TECHNICAL SPECIFICATIONS ASH-103U ASH-203U CHARACTERISTICS Portable amplifier 100 W RMS. Portable amplifier 200 W RMS. Energy efficient and lightweight Lightweight and energy efficient class D circuit amplifier. class D circuit amplifier. 2 UHF receivers with 1 wireless 2 UHF receivers with 1 wireless... - Page 10 - 10 -...
-
Page 11: Warranty
If any service is needed during the warranty period because of lack of conformity, please contact the business or distributor where the product was purchased in no more than 2 months after being conscious of the problem. It is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it. - Page 12 www.fonestar.com...
Need help?
Do you have a question about the ASH-103U and is the answer not in the manual?
Questions and answers