Professional stereo or mono power amplifier (7 pages)
Summary of Contents for FONESTAR ASH-11U
Page 1
ASH-11U, ASH-11U-T ASH-12U, ASH-12U-T PORTABLE CLASS D AMPLIFIER INSTRUCTION MANUAL...
Page 2
AWe take this opportunity to thank you for buying this product. We recommend you read the instruction manual before switching on the machine and follow the instructions that are given. Keep the manual for future reference. SECURITY AND THE ENVIRONMENT ELECTRICAL SECURITY Check that the current in the mains connection where the machine is to be installed corresponds to the power supply of the machine.
The characteristics of the equipment and the content of the manual can change without forewarning. FONESTAR, S.A. does not assume responsibilities regarding the inappropriate use of the equipment or the information supplied in this instruction manual, and specifically disclaims any implied liability for marketability or fitness for any other use.
The system can be powered in 3 ways: 230 V AC, 12 V DC or rechargeable battery included, with LED charge level indicator and charger in the equipment. There is also a hole in the base for a speaker stand with 20 mm Ø tube and models ASH-11U-T and ASH-12U-T have a transport bag with trolley. INSTALLATION AND CONNECTION Do not switch the equipment on without previously reading the instructions for use section.
CONTROLS AND FUNCTIONS The controls for models ASH-11U and ASH-11U-T are shown below. Models ASH-12U and ASH-12U-T are the same but with a second VHF receiver and second wireless microphone. BACK PANEL 1.- Wireless VHF microphone receiver aerial. 2.- LED indicator for reception of wireless VHF microphone RF signal.
Page 6
13.- CD/MP3 player disc slot. 14.- CD/MP3 player display. 15.- 3: to stop CD/MP3 playback. 16.- 7/8: pressing these buttons lets you choose the previous/following song and holding them down is for fast forwarding or rewinding. 17.- +/-: output volume controls for the CD/MP3 player. 18.- q: on/off button for the CD/MP3 player.
INSTRUCTIONS FOR USE RECHARGEABLE BATTERY To charge the battery connect the equipment to a 230 V AC mains connection using the power cable and switch it on with the AC switch on the back panel. Keep the equipment connected to the mains and switched on while it is charging.
Page 8
INSTRUCTIONS FOR USE OF HAND-HELD WIRELESS MICROPHONE 1.- Battery compartment cover: unscrew this cover to access the battery compartment. Use an LR6-AA type battery, preferably alkaline. When you insert the battery, make sure that the polarity is correct. 2.- Power switch: it has 3 positions, ON, STANDBY and OFF. Move it to the ON position to switch on. Move the switch to the central position (STANDBY) to save battery and the microphone will switch on immediately when you move it to the ON position.
TECHNICAL SPECIFICATIONS ASH-11U ASH-11U-T ASH-12U ASH-12U-T CHARACTERISTICS Portable amplifier, 80 W RMS. Portable amplifier, 80 W RMS, Portable amplifier, 80 W RMS. Portable amplifier, 80 W RMS, Class D amplifier circuit, low with transport trolley. Class D amplifier circuit, low with transport trolley.
If any service is needed during the warranty period because of lack of conformity, please contact the business or distributor where the product was purchased in no more than 2 months after being conscious of the problem. It is only necessary to contact FONESTAR if it is impossible or imposes an undue burden for them to solve it.
Need help?
Do you have a question about the ASH-11U and is the answer not in the manual?
Questions and answers