Solid state relays for heaters single-phase g3pe (25 pages)
Summary of Contents for Omron G3R-I-O
Page 1
• High-speed models with optimum input ratings for a variety of sensors are available. • Input Modules and Output Modules that can be used for the G2R are available. • Use a coupler conforming to VDE 0884 and assuring an I/O dielectric strength of 4,000 V.
■ Accessories (Order Separately) Track/Surface Mounting Socket (Recommended) Model Number of poles P2RF-05-E 1 pole (G2R: 1 pole usage) Note: Refer to page 72 for details on other Sockets. Connecting Socket Attaching Plate Model Applicable Socket P2R-P P2R-05A G3R-I/O J-68...
■ I/O Indication I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product. Mark indication Specification AC IN Input module, AC input DC IN Input module, DC input AC OUT Output module, AC output...
Page 4
5 A max. Insulation resistance 100 M min. between input and output Dielectric strength 4,000 VAC, 50/60 Hz for 1 min between input and output Vibration resistance 10 to 55 to 10 Hz, 0.75-mm single amplitude Shock resistance 1,000 m/s Ambient temperature Operating: –30 C to 80 C (with no icing)
Ambient temperature ( C) Ambient temperature ( C) Note: 1. When G730-Z0M04-B is mounted. 2. When G70A-Z0C16 is mounted. One Cycle Surge Current: Non-repetitive Note: Keep the inrush current to half the rated value if it occurs repetitively. G3R-OA202SZN-UTU/OA202SLN-UTU G3R-ODX02SN-UTU G3R-OD201SN-UTU 30 50...
Page 7
14 max. Five, 1.6-dia. hole P2R-057P G3R I/O Relay 32 max. P2R-057P Socket 41 max. Socket Mounting Plate Use the Socket Mounting Plate when arranging several Sockets in a row. R2.25 10 ellipses Square hole G3R-I/O J-73 Solid State Relays...
Page 8
110 VDC max., 240 VAC max. G70A-ZIM16-5 (See note.) Note: Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range. ■ Dimensions Note: All units are in millimeters unless otherwise indicated.
2-A loads can be switched. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice.