Confirming Correct Operation; Entering Monitor Mode - Omron F150-3 - MANUAL 2 Operation Manual

Confirming Correct Operation

4-1

Confirming Correct Operation

4-1-1

Entering Monitor Mode

Note The key allocations for the Console Keys used to make
Procedure
Entering Monitor Mode from Set Mode
138
Use the following procedure to check that measurements are
being correctly performed with the set measurement condi-
tions.
input can be changed. In the following explanations, it is
assumed that the key allocations are at the default set-
tings. If they are not, adapt the procedure accordingly.
→ Page 169
In Set mode, press the ESC Key to leave Set mode and enter
Monitor mode.
Scn 0 = SET =
Adjust
Position compensation
Measurement region
Expression
Scn 0 ▼ MON ▼
Through
Press the ESC Key.
---- --- ms
Freeze
Section 4-1