Omron E5ZN-DRT Datasheet page 3

Nomenclature
E5ZN-DRT
Front Panel Rotary Switches
Used to set the node address when
functioning as a DeviceNet slave.
Front Panel DIP Switch
Used to copy (backup) parameters between
the Temperature Controllers and DeviceNet.
UP/DN (Pin 2): Sets the copy operationmode
(i.e., upload or download).
COPY (Pin 1): Starts the copying.
DeviceNet Connector
Connects to DeviceNet communications
cables. Power for DeviceNet communi-
cations is also supplied though this con-
nector. An FCK2.5/5-STF-5.08AU con-
nector (Phoenix Contact) is provided.
Dimensions
Note: All units are in millimeters unless otherwise indicated.
E5ZN-DRT
10
MS
NODE
ADR
NS
1
ON
TS
UP/DN
COPY
Indicators
Dimensions when Mounted to the
E5ZN-SCT24S Terminal Unit
130 72.8
4.7
30
DeviceNet Communications Unit
Back Panel DIP Switch
Used to specify whether the connection
configuration and I/O allocation is set us-
ing simple I/O allocation or Configurator
I/O allocation.
Pin 1: I/O allocation setting switch
C
Pin 2: Not used (Set to OFF.)
4
Back Panel Rotary Switch
Used to set the maximum unit number
when simple I/O allocation is used.
Terminal Unit Connector
Connects to the E5ZN-SCT24S
Terminal Unit.
27
35
46
89.6
(107.5)
E5ZN-DRT
I-147