Table of Contents
Advertisement
SETTING THE CLOCK
RADIO OPERATION
1
2
3
4
Press PWR to turn the unit on.
Press snd hold DISP for more than 2
seconds.
Press A
to set the hour.
Press ~
to set the minutss.
Press DISP.
The clock starts working from O second.
Havingthe clock dispiayedwhiie
the unit is
turned on
Press DISP. The clock display appears for a few
minutes, then the unit returns to its former diapiay.
1
2
3
4
2
Press PWR to turn the unit on.
Press BAND to seiect the band from
among FM1, FM2, FM3, AMI, and AM2.
The band indication appears cyclically in
order.
FM1, FM2and FM3sharethesamefrequency
range.
AMI and AM2 share the same frequency
range.
Bsnd indication Frequsncyindiceiion
Press (more than 0.5 second) either
TUNE A
or TUNE V
to tune in the
desired station.
Press A
to increase and V
to decrease
the frequency.
The unit startescanning and tunes in a station
automatically (Seek tuning).
Press the button again to deactivate the
function. Repeat the procedure until the
desired station is tuned in.
Note
If you press (less than 0.5 second at a time)
eitherTUNE A
orTUNE V,
the frequency
decreases or increases step by step.
Press VOL to project out the control
and turn it to i-
or -
to atijust the
volume.
5
ENGLISH
Advertisement
Table of Contents
