Advertisement
E3X-DA-SE-S
Ordering information
Item
Order code
NPN output
Pre-wired
E3X-DA11SE-S 2M
*1
Connector version
E3X-DA6SE-S
*1
Order connector separately.
Specifications
Item
E3X-DA_SE-S
Light source (wave length)
Red LED (650 nm)
Power supply voltage
12 to 24 VDC ±10%, ripple (p-p): 10% max.
Protective circuits
Power supply reverse polarity protection, output short-circuit protection, mutual interference prevention
Response time
Operation or reset: 1 ms
Sensitivity setting
Teaching and digital up/down keys
Functions
Auto power control
High-speed control method for emission current
Mutual interference
Optical communications sync, possible for up to 10 Units
prevention
Digital displays
Incident level + threshold
1-button auto-teaching
Workpiece
Pushing the TEACH button during 3 seconds or more
Fiber amplifier connectors
Shape
Type
Fiber amplifier
connector
14
Workpiece
Workpiece
Comment
2 m PVC cable
30 cm PVC cable with M12 plug connector (4 pin)
30 cm PVC cable with M8 plug connector (4 pin)
Digital fiber amplifier with one button
teaching
E3X-DA-SE-S allows easy one button setting and provides the best value
performance ratio for standard applications.
• Auto-teaching during machine operation
• Digital double display for incident level and threshold
• Object or 2-point teaching within a few seconds
PNP output
E3X-DA41SE-S 2M
E3X-DA8SE-S
2-point teaching
Workpiece
Position a workpiece and press
the TEACH button.
Order code
E3X-CN21
E3X-CN21-M1J 0.3M
E3X-CN21-M3J-2 0.3M
Fiber amplifier
Remove a workpiece and press
the TEACH button.
Advertisement
