Omron CX-ONE V1.1 - SETUP MANUAL 11-2005 Setup Manual page 40

CX-One Maintenance
Note
5. The Select Features Dialog Box will be displayed.
The features that are selected will change depending on the CX-One Sup-
port Software already installed in the computer. The CX-One installation
will be modified according to the features selected here.
• Select the features to be added.
• Be sure that all features that are not to be deleted are selected.
• Clear the selections for features to be removed.
Any Support Software feature that is not selected here will be deleted from the
compute. Check the selections carefully.
Click the Next Button.
The CX-One installation will be modified according to the feature selec-
tions. Continue with the installation procedure according to the messages
displayed by the Installation Wizard.
6. If either of the following dialog boxes is displayed, replace the installation
disk (CD-ROM) as instructed by the message and click the OK Button.
Alternatively:
Select the features that are to be
added or those that are not to be
deleted.
Clear the selections for features that
are to be deleted.
Section 2-2
23